Process development of metallic glass wires by a groove quenching technique for production of coil springs
Source abstract
Abstract
Abstract We have developed a continuous production process of metallic glassy alloy wires directly from melt. In the groove quenching process, Zr–Al–Cu–Ni alloy melt was injected to semi-circular groove located on upside surface of Cu-rotating disk. In an optimum operation condition, long glassy alloy wires with diameters ranging from 1 to 2 mm were produced. The cross-sectional geometry of the wires was nearly circular. The resultant wires exhibited almost the same thermal stability as that for the ribbon produced by a single roller melt spinning technique. The change in diameter was measured at an interval of each 10 mm. In addition, coil springs with a mean diameter of 7.2 mm could be formed using a viscous flow process. In this paper, the performance and properties of Zr-based glassy alloy wire are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Inoue · Acta Mater. · 2000 · 48 · 27910.1016/S1359-6454(99)00300-6 ↗
2. Inoue · Mater. Trans. JIM · 1996 · 37 · 18510.2320/matertrans1989.37.185 ↗
3. Zhang · Mater. Trans. JIM · 1991 · 32 · 100510.2320/matertrans1989.32.1005 ↗
4. Inoue · Mater. Trans. JIM · 1995 · 36 · 39110.2320/matertrans1989.36.391 ↗
5. Pang · Mater. Trans. JIM · 2000 · 41 · 149010.2320/matertrans1989.41.1490 ↗
6. Kawamura · Scripta Metall. Mater. · 1997 · 37 · 43110.1016/S1359-6462(97)00105-X ↗
7. Kawamura · Mater. Sci. Forum · 1999 · 304/306 · 34910.4028/www.scientific.net/MSF.304-306.349 ↗
8. Kawamura · Mater. Trans. JIM · 1999 · 40 · 79410.2320/matertrans1989.40.794 ↗
9. Saotome · 1994 · 343
10. Masumoto · Scripta Metall. · 1981 · 15 · 29310.1016/0036-9748(81)90347-1 ↗
11. Masumoto · 1982 · 47
12. Ohnaka · J. Jpn. Inst. Met. · 1978 · 42 · 41510.2320/jinstmet1952.42.4_415 ↗
13. Goto · Mater. Trans. JIM · 1980 · 21 · 21910.2320/matertrans1960.21.219 ↗
14. Inoue · Mater. Trans. JIM · 1995 · 36 · 80210.2320/matertrans1989.36.802 ↗
15. Inoue · Mater. Trans. JIM · 1995 · 36 · 85810.2320/matertrans1989.36.858 ↗
16. Katsuya · Int. J. Rapid Solidif. · 1996 · 9 · 137