journal article·2009-10

Evolution of residual stresses with fatigue crack growth in integral structures with crack retarders

C.D.M. Liljedahl, M.E. Fitzpatrick, L. Edwards

Materials Science and Engineering: A· Volume 523· Issue 1-2
Publisher page

Abstract

Bonded straps are investigated for their ability to retard a growing fatigue crack in metallic structures. The evolution of the residual stresses in the vicinity of the strap with fatigue crack growth has been studied. Cracks were grown in single edge-notched tension (SEN(T)) specimens reinforced with either a titanium or a carbon fibre reinforced plastics (CFRP) strap. The residual stress evolution has been measured in situ during crack growth using neutron diffraction, and modelled with a finite element approach. The peak residual stresses induced by the mismatch of the coefficient of thermal expansion between the strap and plate materials were seen to be fairly constant with crack growth. Good correlation between the experimental and the modelling results was found, except at very long crack lengths for a specimen that exhibited considerable fracture surface roughness at long crack lengths. The difference was attributed to wedging of the fracture surface changing the expected stress state, rather than any effect of the strap.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · High-Velocity Impact and Material Behavior · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Zhang · Engineering Fracture Mechanics · 2009 · 76 · 11410.1016/j.engfracmech.2008.02.003 ↗
2. P. E. Irving, D. Figueroa-Gordon, Routes to improved damage tolerance; prediction of damage tolerant performance of high strength and hybrid structures, in First International Conference on Damage Tolerance of Aircraft Structures R. Benedictus, J. Schijve, R.C. Alderliesten, J.J. Homan (eds.), Delft, Holland, 2007, http://dtas2007.fyper.com/userfiles/file/Paper%2054_Irving.pdf, Accessed April 2009.
3. Liljedahl · Composite Structures · 2008 · 86 · 34410.1016/j.compstruct.2007.10.033 ↗
4. Liljedahl · Materials Science and Engineering · 2008 · 486 · 10410.1016/j.msea.2007.09.066 ↗
5. FM(r) 94 Modified Epoxy Film Datasheet. http://www.cytec.com/engineered-materials/products/Datasheets/FM 94.pdf. Accessed July 7th 2009.
6. Fitzpatrick · 2003
7. Bragg · Proceedings of the Philosophical Society · 1914 · 17 · 43
8. Santisteban · Journal of Applied Crystallography · 2006 · 39 · 81210.1107/S0021889806042245 ↗
9. Pirling · Materials Science and Engineering: A · 2006 · 437 · 13910.1016/j.msea.2006.04.083 ↗
10. E647-88a, ASTM, 1990.
11. Pawley · Journal of Applied Crystallography · 1981 · 14 · 35710.1107/S0021889881009618 ↗
12. Daymond · Journal of Applied Physics · 1997 · 82 · 155410.1063/1.365956 ↗
13. Clausen · Acta Materialia · 1998 · 46 · 308710.1016/S1359-6454(98)00014-7 ↗
14. Seo · Composite Structures · 2002 · 57 · 32310.1016/S0263-8223(02)00095-8 ↗
15. Hosseini-Toudeshky · Composite Structures · 2007 · 79 · 23410.1016/j.compstruct.2006.01.005 ↗
16. Kuczynski · IBM Journal of Research & Development · 2001 · 45 · 78310.1147/rd.456.0783 ↗
17. Bair · Polymer Engineering & Science · 1990 · 30 · 60910.1002/pen.760301008 ↗