Internal friction and impact toughness of structural BCC alloys
Source abstract
Abstract
Abstract The paper deals with acoustic properties (Young's modulus E and logarithmic decrement δ ) and impact toughness of the BCC alloys: low activation ferritic–martensitic steel EK-181 (produced in the RF) and V–(4–10)Ti–(4–5)Cr alloys (produced in the RF, USA and Japan). The materials have been investigated in ∼77–300 K temperature range where BCC metals usually become brittle at low temperatures. The acoustic measurements were made by composite oscillator technique mainly in the amplitude-independent damping ( δ i ) range at frequencies of longitudinal vibrations of about 100 kHz. The data have been obtained for annealed, plastically bent and bent-then-straightened specimens. The δ i ( T ) dependences for the pre-bent samples show a similar behavior as the impact toughness of the alloys. So, the ductile to brittle transition temperature (DBTT) for the BCC alloys can be determined by an acoustic non-destructive technique. It has been found that the acoustical DBTT depends on microstructure of specimens (internal stresses) and is different for the EK-181 steel of different thermal–mechanical treatments and for the RF, USA and Japan vanadium alloys. A comparison of the δ i ( T ) curves for the BCC EK-181 steel and for the FCC austenitic EK-164 steel is shown and discussed as well. A viscous dragging of edge dislocations is found to control the ductile to brittle transition of the BCC alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Nuclear Materials and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Solonin · J. Nucl. Mater. · 1998 · 258–263 · 3010.1016/S0022-3115(98)00353-5 ↗
2. R.L. Klueh, D.R. Harris, High-chromium ferritic and martensitic steels for nuclear applications, ASTM stock number: MONO3, 2001.10.1520/MONO3-EB ↗
3. Chernov · Nucl. Fusion · 2007 · 47 · 83910.1088/0029-5515/47/8/015 ↗
4. Solonin · Fizika i khimiya obrabotki materialov · 2001 · 5 · 5
5. Kurtz · J. Nucl. Mater. · 2004 · 329–333 · 4710.1016/j.jnucmat.2004.04.299 ↗
6. Kardashev · Technol. Phys. Lett. · 2006 · 32 · 79910.1134/S1063785006090197 ↗
7. Kardashev · Phys. Solid State · 2008 · 50 · 85410.1134/S1063783408050090 ↗
8. Potapenko · Vopr. At. Nauki Tech., Ser.: Materialoved. Nov. Mater. · 2005 · 1 · 340
9. Nishimura · J. Nucl. Mater. · 2002 · 307–311 · 57110.1016/S0022-3115(02)01039-5 ↗
10. Smith · J. Nucl. Mater. · 1996 · 233–237 · 35610.1016/S0022-3115(96)00231-0 ↗
11. Granato · J. Appl. Phys. · 1956 · 27 · 58310.1063/1.1722436 ↗