journal article·2009-07

The effects of processing variables on strength of carbon bonding between carbon/carbon composites

Hiroshi Hatta, Masashi Koyama, Takamasa Bando, Yasuo Kogo, Hiroshi Fukuda, Hatsuo Ishida

Publisher page

Abstract

Abstract Bonding technique between carbon–carbon composites (C/Cs) was discussed using carbon as a bonding material. Carbon/carbon plates were first bonded using resin. The resin-bonded C/C composites were then heat-treated to carbonize the bonding layer under low pressure. The strength of the carbon bonding was evaluated at room temperature. Main focus was placed upon finding the effect of polymer precursor of the bonding layer, the thickness of the bonding layer, bonding pressure, bonding direction of substrate C/Cs on the bonding strength. The optimized bonding strength was shown to be equal to or higher than the interlaminar shear strength of substrate C/Cs. This high strength was obtained when bonding layer was thin and bonding precursor was phenolic resin even for flat-wise bonding. The effects of other parameters, including thermal residual stresses and cracks in the bonding layer, on the bonding strength were also discussed using the Kendall equation with an aid of finite element calculations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Advanced ceramic materials synthesis · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. J.D. Buckley, NASA Reference Publication 1254 (1992) 267–281.
2. Fitzer · 1998
3. Davis · J. Spacecraft · 1979 · 16 · 43210.2514/3.57681 ↗
4. Dadras · J. Am. Ceram. Soc. · 1993 · 76 · 127410.1111/j.1151-2916.1993.tb03752.x ↗
5. Krenkel · Int. Conf. Ceram. Mater. Matrix Compos. · 1996 · 9
6. Koyama · Carbon · 2004 · 43 · 17110.1016/j.carbon.2004.09.002 ↗
7. T. Chang, T. Nakagawa, A. Okura, Report of the Institute of Industrial Science, The University of Tokyo, 35 (8), 1991, pp. 1–20.
8. Shen · Polym. Compos. · 1996 · 17 · 71010.1002/pc.10663 ↗
9. Runk · Ceram. Bull. · 1975 · 54 · 199
10. Tanabe · Carbon · 2001 · 39 · 29410.1016/S0008-6223(00)00218-9 ↗
11. Tanabe · Carbon · 2001 · 39 · 234710.1016/S0008-6223(01)00069-0 ↗
12. Hatta · Trans. JSME · 1999 · 65 · 207310.1299/kikaia.65.2073 ↗
13. Hatta · Adv. Compos. Mater. · 2004 · 13 · 14110.1163/1568551041718035 ↗
14. Hatta · Mater. Syst. · 1995 · 14 · 15
15. Aly-Hassan · Carbon · 2003 · 41 · 106910.1016/S0008-6223(02)00442-6 ↗
16. E. Yasuda, N. Takase, S, Kimura, Report of the Research Laboratory of Engineering Materials, Tokyo Institute of Technology, Number 4, 1979.
17. Kendall · J. Phys. D: Appl. Phys. · 1973 · 6 · 178210.1088/0022-3727/6/15/304 ↗
18. Kimura · Tanso · 1991 · 13410.7209/tanso.1991.134 ↗