journal article·2007-10

Influence of firing temperature on interface adhesion between screen-printed Ag film and BaTiO3 substrate

Chao-Yu Lee, Michel Dupeux, Wei-Hsing Tuan

Materials Science and Engineering: A· Volume 467· Issue 1-2
Publisher page

Abstract

Abstract Interfaces between porous metal and ceramic are commonly used in many advanced engineering components. The adhesion strength between a porous silver coating and pure barium titanate has been determined here using a blister test. The porous Ag layer was made by screen printing and sintering on a flat dense barium titanate surface. Firing temperature influences the porosity of the silver film and Ag/BaTiO 3 interface strength. A simple graphic procedure was used to subtract the effect of the generalized plastic yielding in the Ag membrane from the total strain energy produced by the pressure application. The average value of the critical interface crack propagation energy G ci at the porous Ag/BaTiO 3 interface ranges between 4.5 and 6.6 J/m 2 while the porosity decreases from 11% to 7%. The observed trend of interfacial fracture energy can offer insights into the interfacial fracture mechanisms between porous metal films and ceramic substrates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Metal and Thin Film Mechanics · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Ernst · Mater. Sci. Eng. R · 1995 · 14 · 9710.1016/0927-796X(95)80001-8 ↗
2. Volinsky · Acta Mater. · 2002 · 50 · 44110.1016/S1359-6454(01)00354-8 ↗
3. Bosseboeuf · 1998 · 169
4. Dupeux · 1998 · 319
5. Hohlfelder · Mater. Res. Soc. Symp. Proc. · 1995 · 356 · 58510.1557/PROC-356-585 ↗
6. Tabata · Sens. Actuators · 1989 · 20 · 13510.1016/0250-6874(89)87111-2 ↗
7. Small · Mater. Res. Soc. Symp. Proc. · 1993 · 308 · 15910.1557/PROC-308-159 ↗
8. Paviot · Mater. Res. Soc. Symp. Proc. · 1995 · 356 · 57910.1557/PROC-356-579 ↗
9. Bonnotte · J. Phys. III · 1995 · 5 · 95310.1051/jp3:1995169 ↗
10. Maier-Schneider · J. Microelectromech. Syst. · 1995 · 4 · 23810.1109/84.475551 ↗
11. Hohlfelder · Mater. Res. Soc. Symp. Proc. · 1997 · 436 · 11510.1557/PROC-436-115 ↗
12. Sizemore · Mater. Res. Soc. Symp. Proc. · 1993 · 308 · 16510.1557/PROC-308-165 ↗
13. Mougin · Mater. Sci. Technol. · 2002 · 18 · 121710.1179/026708302225006098 ↗
14. Lee · Scripta Mater. · 2006 · 54 · 45310.1016/j.scriptamat.2005.10.020 ↗
15. Radi · Int. J. Solids Struct. · 2001 · 38 · 823510.1016/S0020-7683(01)00142-1 ↗
16. Radi · J. Mech. Phys. Solids · 1996 · 44 · 147510.1016/0022-5096(96)00037-3 ↗
17. Suganuma · 1998 · 249
18. Oliveria · Mater. Res. · 2002 · 5 · 26910.1590/S1516-14392002000300009 ↗
19. Sugihara · 1990 · 432
20. Skriver · Phys. Rev. B · 1992 · 46 · 715710.1103/PhysRevB.46.7157 ↗
21. Cao · Mech. Mater. · 1989 · 7 · 29510.1016/0167-6636(89)90020-3 ↗
22. Evans · Met. Trans. A · 1990 · 21A · 241910.1007/BF02646986 ↗
23. Felder · 2003