Microstructure and mechanical properties of electrodeposited Ni and Ni–matrix-nanocomposite thin films
Source abstract
Abstract
Abstract Ni and Ni-matrix-nanocomposite thin films were produced by constant-current electrodeposition from a sulphamate bath. The composite consisted of an array of Ag-coated SnO 2 nanowires grown onto a substrate, around which the Ni matrix was deposited. The hardness and Young's modulus of the films were studied by microindentation, showing a strengthening of 66% for the composite with respect to Ni films produced using the exact same bath and deposition parameters as the composite's matrix. A straightforward method for evaluating the stress–strain relationship from indentation data based on analytical and computational models available in the literature was proposed and evaluated. A thorough microstructure characterisation by scanning electron microscopy together with electron backscatter diffraction was conducted to assist in the interpretation of the mechanical response of the films. The Ag–SnO 2 in the composite prevented the development of texture and was responsible for a grain size reduction of 85%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Metal and Thin Film Mechanics · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Dennis · 1993
2. Nickel Plating Handbook, Nickel Institute, 2014.
3. Effect of electrodeposition conditions and reinforcement content on microstructure and tribological properties of nickel composite coatings10.1016/j.surfcoat.2011.02.057 ↗
4. Effects of processing on texture, internal stresses and mechanical properties during the pulsed electrodeposition of nanocrystalline and ultrafine-grained nickel10.1016/j.actamat.2013.03.008 ↗
5. Effect of current density and organic additives on the texture and hardness of Ni electrodeposited from sulfamate and Watt's solutions10.2320/matertrans.M2009361 ↗
6. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
7. The cleavage strength of polycristals
8. Nanocrystalline metals prepared by electrodeposition10.1524/zpch.2008.222.2-3.319 ↗
9. Nanocrystalline nickel and nickel-copper alloys: synthesis, characterization, and thermal stability10.1557/JMR.1998.0169 ↗
10. Electrochemical codeposition of inert particles in a metallic matrix10.1007/BF00573209 ↗
11. The influence of grain size and texture on the Young’s modulus of nanocrystalline nickel and nickel–iron alloys10.1080/14786435.2011.615350 ↗
12. Mechanical properties of nanocrystalline nickel produced by electrodeposition10.1016/S0965-9773(99)00050-1 ↗
13. Electroless deposition of a Ag matrix on semiconducting one-dimensional nanostructures10.1016/j.tsf.2013.03.054 ↗
14. Production and characterization of nanocomposite thin films based on Ni matrix reinforced with SnO2 single-crystalline nanowires for electrical contact applications10.1016/j.jallcom.2014.03.066 ↗
15. One-dimensional SnO2 nanostructures: synthesis and applications10.1155/2012/917320 ↗
16. Doping-dependent electrical characteristics of SnO2 nanowires10.1002/smll.200700753 ↗
17. Tribological behavior of electrodeposited Ni–SnO2 nanocomposite coatings on steel10.1016/j.surfcoat.2010.10.059 ↗
18. Welding behavior of Ag/SnO2 contact material with microstructure and additive modifications
19. The Ag−Ni (Silver–Nickel) system10.1007/BF02873194 ↗
20. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
21. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
22. Metallic Materials – Instrumented Indentation Test for Hardness and Materials Parameters – Part 4: Test Method for Metallic and Non-metallic Coatings, DIN EN ISO 14577-4 2007.
23. Zener pinning
24. Inhibition of grain growth by second-phase particles10.1016/0001-6160(88)90053-3 ↗
25. Effect of grain size on the tribological behavior of nanocrystalline nickel10.1016/j.msea.2003.09.107 ↗
26. Mechanical property evaluation and failure analysis of cantilevered LIGA nickel microposts10.1109/84.946780 ↗
27. Properties and microstructure of nickel electrodeposited from a sulfamate bath containing ammonium ions10.1023/A:1017970417874 ↗
28. Texture of electrodeposited Ni films10.4028/www.scientific.net/MSF.449-452.565 ↗
29. Texture development in thin films10.4028/www.scientific.net/MSF.408-412.75 ↗
30. Kaupp · 2006
31. Hall–Petch relationship and dislocation model for deformation of ultrafine-grained and nanocrystalline metals10.2320/matertrans.MA201310 ↗
32. Plasticity and strength of micro- and nanocrystalline materials10.1134/S1063783407060017 ↗
33. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
34. The equilibrium of linear arrays of dislocations10.1080/14786445108561060 ↗
35. Petch relation and grain boundary sources
36. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
37. What is behind the inverse Hall-Petch effect in nanocrystalline materials10.1016/j.actamat.2007.02.021 ↗
38. Hosford · 2005
39. Predicting twinning stress in fcc metals: linking twin-energy pathways to twin nucleation10.1016/j.actamat.2007.08.042 ↗
40. Effects of grain orientation on the Hall–Petch relationship in electrodeposited nickel with nanocrystalline grains10.1016/j.scriptamat.2009.11.038 ↗
41. Meyers · 2009
42. Abnormal grain growth effects on the mechanical behavior of Ni electrodeposits10.4028/www.scientific.net/MSF.467-470.957 ↗
43. Nanoindentation Measurements of the mechanical properties of Ni thin films: effects of film microstructure and substrate modulus10.1080/10426910601062313 ↗
44. Young's modulus of electroplated Ni thin film for MEMS applications10.1016/j.matlet.2004.02.044 ↗
45. Predictions of effective physical properties of complex multiphase materials10.1016/j.mser.2008.07.001 ↗
46. Watchman · 1969 · 139
47. The elastic constants of a solid containing spherical holes10.1088/0370-1301/63/1/302 ↗
48. Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle10.1002/zamm.19290090104 ↗
49. An inverse approach for extracting elastic–plastic properties of thin films from small scale sharp indentation10.1016/S1005-0302(12)60108-X ↗
50. Characterization of stress–strain relationships of elastoplastic materials: an improved method with conical and pyramidal indenters10.1016/j.mechmat.2012.07.006 ↗
51. Computational modeling of the forward and reverse problems in instrumented sharp indentation10.1016/S1359-6454(01)00295-6 ↗
52. The correlation between indentation hardness and material properties with considering size effect10.1557/jmr.2014.120 ↗
53. Characterization of materials' elasticity and yield strength through micro-/nano-indentation testing with a cylindrical flat-tip indenter10.1557/jmr.2015.4 ↗
54. Indentation hardness and hot pressing10.1016/0001-6160(80)90166-2 ↗
55. Influence of penetration depth and mechanical properties on contact radius determination for spherical indentation10.1016/j.ijsolstr.2005.06.007 ↗
56. A theoretical study of the Brinell hardness test10.1098/rspa.1989.0056 ↗
57. Tabor · 1951
58. General relationship between strength and hardness10.1016/j.msea.2011.08.061 ↗
59. Scaling approach to conical indentation in elastic–plastic solids with work hardening10.1063/1.368196 ↗