Method to decode stress-strain diagrams to identify the structure-strength relationships in aged aluminum alloys
Source abstract
Abstract
Abstract Leading-edge infrastructure renovation is driven by innovations in materials processing to optimize desired properties. The immediate challenge for the metal industry is the development of effective and efficient materials quality-control practices. At present, mechanical and sheet forming properties are assessed using standard tensile tests to measure yield and ultimate tensile strengths, as well as the total elongation to failure. The resulting stress-strain data is used as a “pass-fail” test to ensure that the product meets industry specifications. We report a new method of constitutive relation analyses (CRA) that can extract fundamental information regarding the underlying crystalline mechanisms of deformation and failure from standard stress-strain data. The CRA method is applied to industrial extrusion product made from AA6063 aluminum alloy to demonstrate how this type of forensic examination can be used to direct changes to thermo-mechanical processing to optimize desired material properties. The CRA prediction of point-defect generation and nano-void formation leading to ductile failure during plastic flow was validated by small angle X-ray scattering (SAXS) studies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. R. Holmestand, C.D. Marioara, F.J.H. Ehlers, M. Torsaeter, R. Bjorge, J Royse, S.J. Andersen, Precipitation in 6XXX aluminum alloys, in: Proc. 12th Intern. Conf. Aluminum Alloys, Pub. Japan Institute of Light Metals, 2010, pp. 30–39.
2. Tensile deformation
3. The relationship between stress and strain for homogeneous deformation
4. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
5. Transition from laminar to rotational motion in plasticity10.1098/rsta.1997.0100 ↗
6. Argon · 2008
7. Constitutive relation based on Taylor slip analysis to replicate work-hardening evolution10.1016/j.actamat.2010.09.065 ↗
8. Plastic strain in metals
9. A new analysis of yielding and work hardening in AA1100 and AA575410.1016/j.actamat.2012.08.014 ↗
10. Point defect generation, nano-void formation and growth: I. Validation10.1080/14786435.2012.661479 ↗
11. Constitutive analyses of tensile tests on pre-rolledAA3003 sheets10.4028/www.scientific.net/MSF.794-796.710 ↗
12. New yield function for aluminum alloys based on plastic work and work-hardening analyses10.1016/j.actamat.2016.07.036 ↗
13. Re-examining of the relation between fracture strain and yield stress in Al-Mg-Si alloys10.1016/j.msea.2017.08.070 ↗
14. Point defect generation, nano-void formation and growth: II. Criterion for ductile failure10.1080/14786435.2012.661480 ↗
15. Precipitation hardening10.1007/BF02670416 ↗
16. Work hardening behaviour of heat-treatable Al-Mg-Si alloys10.4028/www.scientific.net/MSF.519-521.1901 ↗
17. Clustering and vacancy behaviour in high- and low-solute Al-Mg-Si alloys10.1007/s11661-014-2527-3 ↗
18. Observations of giant diffusivity along dislocation cores10.1126/science.1151771 ↗
19. Acoustic study of kinetics of vacancy diffusion toward dislocations in aluminum10.1016/j.actamat.2004.10.007 ↗
20. Small-angle X-ray scattering investigation of deformation-induced nano-voids in AA6063 aluminum alloy10.1080/14786435.2017.1340684 ↗
21. Hardening al Al-Mg-Si alloys: effect of trace elements and prolonged natural ageing10.1016/j.matdes.2016.06.014 ↗
22. Thermally activated glide in face-centred cubic metals and its application to the theory of strain hardening10.1080/14786435908233412 ↗
23. Dynamic dislocation-defect analysis10.1080/14786430500367347 ↗
24. Effects of solubility limit and the presence of ultra-fine Al6Fe on the kinetics of grain growth in dilute Al-Fe alloys10.4028/www.scientific.net/MSF.550.339 ↗
25. The density and distribution of dislocations in deformed copper crystals10.1016/0001-6160(62)90120-7 ↗
26. Constitutive relations analyses of dual-phase steels to elucidate structure-strength-ductility correlations10.1007/s11837-017-2339-1 ↗