journal article·2017-07

Investigation on crashworthiness of ultrafine grained A356 sheets and validation of Hall-Petch relationship at high strain-rate deformation

R.J. Immanuel, S.K. Panigrahi, G. Racineux, S. Marya

Publisher page

Abstract

Abstract High crushing force and good energy absorption are the essential requirements for structural materials subjected to dynamic loading. In the present work, commercial A356 material is subjected to cryorolling and post-cryoroll annealing to produce sheets of different grain sizes and the influence of microstructural change on dynamic behavior of the material is studied. Dynamic tests are done in a crossbow test equipment at an average strain rate of 250 s −1 . Quasi-static tests are done at an initial strain rate of 0.005 s −1 to compare the dynamic performance of the material with its static/quasi-static behavior. It is found that strength and ductility of cryorolled material at dynamic loading condition is lesser than that in quasi-static loading. Upon annealing, the material performance of the material is found to be better at high strain-rate deformation than that at quasi-static condition. A detailed analysis on the deformation behavior and fracture mechanism of the material at high strain-rate is carried out. Further, the existence of Hall-Petch relationship at high strain-rate deformation is evaluated. The material's strengthening factor is found to hold good agreement to the Hall-Petch relationship with a grain boundary strengthening coefficient of 112 MPa at dynamic loading.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · High-Velocity Impact and Material Behavior · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Twenty-five years of ultrafine-grained materials: achieving exceptional properties through grain refinement10.1016/j.actamat.2013.08.018 ↗
2. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
3. High tensile ductility in a nanostructured metal10.1038/nature01133 ↗
4. Development of ultrafine grained high strength Al–Cu alloy by cryorolling10.1016/j.scriptamat.2006.03.012 ↗
5. Cryorolling effect on microstructure and mechanical properties of Fe–25Cr–20Ni austenitic stainless steel10.1016/j.matdes.2015.09.029 ↗
6. Mechanical behaviour and microstructural characterizations of ultrafine grained Zircaloy-2 processed by cryorolling10.1016/j.msea.2014.02.025 ↗
7. Formation of nanostructures in commercial-purity titanium via cryorolling10.1016/j.actamat.2012.10.026 ↗
8. Influence of cryorolling on microstructure and mechanical properties of a cast hypoeutectic Al–Si alloy10.1016/j.msea.2015.06.019 ↗
9. Test methods for composites crashworthiness: a review
10. High strain rate properties of metals and alloys10.1179/174328008X277795 ↗
11. High speed deformation of ultrafine grained TWIP steel10.4028/www.scientific.net/MSF.561-565.107 ↗
12. Dynamic behavior of ECAP processed aluminum at room and sub-zero temperatures
13. Mechanical behavior of ultrafine-grained materials under combined static and dynamic loadings10.1051/epjconf/20159401036 ↗
14. Tensile deformation behavior of aluminum alloys at warm forming temperatures10.1016/S0921-5093(02)00915-2 ↗
15. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
16. R.J. Immanuel, S.K. Panigrahi, Influence of Initial Microstructure on the Microstructural Stability and Mechanical Behavior of Cryorolled A356 Alloy Subjected to Annealing, Accept. Publ. Metall. Mater. Trans. A. (n.d.).
17. Physical metallurgy and the effect of alloying additions in aluminum alloys
18. A model for dislocation generation in shock-wave deformation10.1016/B978-1-4832-8412-5.50094-1 ↗
19. Dynamic recrystallization in high-strain, high-strain-rate plastic deformation of copper10.1016/0956-7151(94)90417-0 ↗
20. Strain rate dependence on mechanical properties in some commercial aluminum alloys