journal article·2012-07

High temperature mechanical properties of an aluminum alloy containing Zn and Mg

P. Leo, S. Spigarelli, E. Cerri, M. El Mehtedi

Publisher page

Abstract

Abstract This paper studies the high temperature mechanical properties of as-cast Al–Zn–Mg using tensile and creep testing. Hot tensile tests were performed in the temperature and strain rate ranges of 350–400 °C and 10 −5 to 10 −3 s −1 respectively. Creep tests were carried out under constant load with initial stress ranging from 5 to 22 MPa, at 350 and 400 °C. The alloy exhibits class A creep behavior, due to the viscous glide of dislocations. The tensile flow curves, corrected to account for the effect of sample elongation on strain rate, also show a decline in stress commonly observed in Al–Mg alloys. The highest ductility and strain rate sensitivity were both observed for strain rates ranging from 10 −5 to 10 −4 s −1 . During hot deformation the alloy exhibits cavitation which increases with temperature. The analysis of these phenomena has shown that cavity growth is mainly controlled by plastic strain.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. McQueen · Can. Metall. Quart. · 1997 · 36 · 73
2. Laue · 1981
3. Baba · 1977 · 301
4. Polmear · 1995
5. Humphreys · Acta Metall. · 1987 · 35 · 281510.1016/0001-6160(87)90281-1 ↗
6. Konopleva · Mater. Charact. · 1995 · 34 · 25110.1016/1044-5803(95)00062-3 ↗
7. Doherty · Mater. Sci. Eng. A · 1997 · 238 · 21910.1016/S0921-5093(97)00424-3 ↗
8. McQueen · 1971
9. Fulop · J. Test Eval. · 1977 · 5 · 41910.1520/JTE10554J ↗
10. Ryan · J. Mech. Working Tech. · 1986 · 12 · 32310.1016/0378-3804(86)90004-5 ↗
11. Sellars · Int. Metall. Rev. · 1972 · 17 · 110.1179/095066072790137765 ↗
12. McQueen · 2011
13. Linga Murty · Mater. Sci. Eng. A · 2005 · 410–411 · 2810.1016/j.msea.2005.08.006 ↗
14. Yavari · Acta Metall. · 1982 · 30 · 218110.1016/0001-6160(82)90139-0 ↗
15. Kassner · 2004
16. Yavari · Acta Metall. · 1981 · 29 · 149510.1016/0001-6160(81)90184-X ↗
17. Cavitation in superplasticity
18. Taleff · Metall. Mater. Trans. · 2001 · 32A · 111910.1007/s11661-001-0123-9 ↗
19. Ashby · Acta Metall. · 1979 · 27 · 69910.1016/0001-6160(79)90105-6 ↗
20. Nicolau · Acta Mater. · 2003 · 51 · 61310.1016/S1359-6454(02)00441-X ↗
21. Rice · J. Mech. Phys. Solids · 1969 · 17 · 20110.1016/0022-5096(69)90033-7 ↗
22. McClintock · J. Appl. Mech. · 1968 · 35 · 36310.1115/1.3601204 ↗
23. Monkman · Proc. ASTM · 1956 · 56 · 593
24. Oikawa · Mater. Sci. Eng. · 1977 · 29 · 13110.1016/0025-5416(77)90117-3 ↗
25. Jiang · J. Mater. Sci. · 1994 · 29 · 549910.1007/BF00349941 ↗
26. Lee · Acta Mater. · 2004 · 52 · 311110.1016/j.actamat.2004.03.012 ↗
27. Stowell · Acta Metall. · 1984 · 32 · 3510.1016/0001-6160(84)90199-8 ↗
28. Soliman · Metall. Mater. Trans. · 1984 · 15A · 189310.1007/BF02664903 ↗
29. Blum · Acta Metall. · 1970 · 30 · 170510.1016/0001-6160(82)90192-4 ↗
30. Oikawa · Trans. Jpn. Inst. Met. · 1978 · 19 · 61110.2320/matertrans1960.19.611 ↗
31. Hu · Mater. Sci. Eng. · 2008 · A488 · 6410.1016/j.msea.2007.10.051 ↗
32. El Mehtedi · Metall. Sci. Technol. · 2004 · 22 · 3
33. Oikawa · Mater. Sci. Eng. · 1984 · 64 · 23710.1016/0025-5416(84)90107-1 ↗
34. Li · Acta Mater. · 1998 · 46 · 114310.1016/S1359-6454(97)00320-0 ↗
35. Han · Mater. Sci. Eng. · 2002 · A322 · 7310.1016/S0921-5093(01)01119-4 ↗
36. Friedel · 1964
37. Li · Mater. Sci. Eng. · 1998 · A245 · 110.1016/S0921-5093(97)00712-0 ↗