journal article·2011-05

Cyclic mechanical behaviour of Sn3.0Ag0.5Cu alloy under high temperature isothermal ageing

B. Dompierre, V. Aubin, E. Charkaluk, W.C. Maia Filho, M. Brizoux

Materials Science and Engineering: A· Volume 528· Issue 13-14
Publisher page

Abstract

Abstract For SnAgCu alloys, the results of previous studies suggest that high-temperature thermal ageing causes quick and significant deterioration of their mechanical properties. However, the acceleration law of thermal ageing and the relationship between thermal ageing and the cyclic mechanical behaviour remain unknown. The aim of this study was to investigate the influence of isothermal ageing on the cyclic mechanical behaviour of Sn3.0Ag0.5Cu. First, ageing conditions were defined by taking into account the in-field operational conditions. Then, for all ageing conditions (75 °C, 125 °C and 150 °C up to 6500 h), the Vickers hardness was measured and the changes in this value were analysed during thermal ageing. At the same time, cross-polarised light microscopy observations on the same samples demonstrated the relation between the decrease in hardness and the changes in the microstructure for various samples. Finally, reversed mechanical cyclic tests were carried out at room temperature on specimens before and after ageing (125 °C, 500 h) in various conditions (strain rate/strain amplitude/dwell time).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Siewert · 2003
2. Choi · Journal of Electronic Materials · 1999 · 28 · 120910.1007/s11664-999-0159-y ↗
3. Tian · Acta Metallurgica Sinica (English Letters) · 2006 · 19 · 30110.1016/S1006-7191(06)60059-8 ↗
4. Wiese · Microelectronics Reliability · 2004 · 44 · 189310.1016/j.microrel.2004.04.015 ↗
5. Telang · Journal of Electronic Materials · 2004 · 33 · 141210.1007/s11664-004-0081-2 ↗
6. Xu · 2006 · 275
7. Dompierre · 2009 · 342
8. Zhang · Journal of Electronic Materials · 2009 · 38 · 24110.1007/s11664-008-0582-5 ↗
9. Anderson · Journal of Electronic Materials · 2004 · 33 · 148510.1007/s11664-004-0090-1 ↗
10. Xu · Journal of Electronic Materials · 2006 · 35 · 210710.1007/s11664-006-0320-9 ↗
11. Lu · Journal of Materials Science: Materials in Electronics · 2006 · 17 · 171
12. Ma · 2008 · 335
13. Wiese · 2005 · 1272
14. Anderson · Journal of Electronic Materials · 2006 · 35 · 9410.1007/s11664-006-0190-1 ↗
15. Wei · Journal of Electronic Materials · 2009 · 38 · 34510.1007/s11664-008-0586-1 ↗
16. Dompierre · Procedia Engineering · 2010 · 2 · 147710.1016/j.proeng.2010.03.159 ↗
17. Kim · Materials Science and Engineering A · 2002 · 333 · 10610.1016/S0921-5093(01)01828-7 ↗
18. Poh · 2008 · 627
19. Jun · 2007 · 1
20. Pei · 2005 · 45
21. Bai · International Journal of Plasticity · 2009 · 25 · 218110.1016/j.ijplas.2009.02.007 ↗
22. Metasch · 2009 · 322
23. Park · Components and Packaging Technologies · 2007 · 30 · 17810.1109/TCAPT.2007.892101 ↗
24. Matin · Materials Science and Engineering A · 2006 · 431 · 16610.1016/j.msea.2006.05.144 ↗
25. Miyazawa · 1999 · 616
26. IPC (2006).
27. Dompierre · Microelectronics Reliability · 2010 · 50 · 166110.1016/j.microrel.2010.07.125 ↗
28. Wang · 2006 · 1
29. Kanchanomai · Journal of Electronic Materials · 2002 · 31 · 45610.1007/s11664-002-0100-0 ↗
30. Fischer-Cripps · 2004
31. Hansen · Scripta Materialia · 2004 · 51 · 80110.1016/j.scriptamat.2004.06.002 ↗
32. Moniz · 2007