journal article·2005-01

Cyclic and isothermal exposures of 310SS to 10%CH4/H2 carburizing gas mixture at high temperatures

Ruchuan Yin

Materials Science and Engineering: A· Volume 391· Issue 1-2
Publisher page

Abstract

Abstract Carburization of 310 stainless steel (310SS) has been investigated after cyclic and isothermal exposures to 10%CH 4 /H 2 carburizing gas mixtures at 900–1100 °C for 500 h. At 900 °C in 10%CH 4 /H 2 , 310SS suffered external and internal carburization with some external oxidation, and a continuous layer consisting predominantly of Cr/Fe-carbides was formed on the alloy surface. At 1000 and 1100 °C in 10%CH 4 /H 2 , however, external carburization occurred exclusively, semi-continuous and discontinuous external layers of Cr/Fe-carbides were formed, respectively. These experimental results are approximately consistent with the thermodynamic analysis. Cr segregation has been proposed to be associated with carburization modes and continuity of an external layer. The continuity of an external layer is primarily dependent on temperature rather than exposure duration, while the size and morphology of surface carbides are both temperature- and time-dependent. Metal dusting was not experienced in this study.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. H.J. Grabke, Carburization—A High Temperature Corrosion Phenomenon, Materials Technology Institute, 1998, p. 5.
2. G.Y. Lai, High Temperature Corrosion of Engineering Alloys, ASM International, Materials Park, OH, 1990, p. 47.
3. Grabke · Mater. Sci. Eng · 1987 · 87 · 2310.1016/0025-5416(87)90357-0 ↗
4. Rahmel · Mater. Corr · 1998 · 49 · 22110.1002/(SICI)1521-4176(199804)49:4<221::AID-MACO221>3.0.CO;2-X ↗
5. R.F. Hochman, Basic studies of metal deterioration (metal dusting) in carbonaceous environments at elevated temperatures, in: N.E. Hammer (Ed.), Proceedings of the Fourth International Congress on Metal Corrosion, NACE, Houston, 1972, p. 258.
6. Grabke · Corr. Sci · 1993 · 35 · 114110.1016/0010-938X(93)90334-D ↗
7. Nava Paz · Oxide Met · 1993 · 39 · 43710.1007/BF00664665 ↗
8. Grabke · Mater. Corr · 1998 · 49 · 30310.1002/(SICI)1521-4176(199805)49:5<303::AID-MACO303>3.0.CO;2-P ↗
9. Grabke · Oxide Met · 1998 · 50 · 24110.1023/A:1018888321213 ↗
10. Baumert · Mat. Perform · 1998 · 37 · 60
11. Holland · Int. J. Pres. Ves. Piping · 1996 · 66 · 12510.1016/0308-0161(95)00089-5 ↗
12. T. Shibasaki, K. Takemura, T. Mohri, H. Hashimoto, Ammonia Technical Manual, 1996, pp. 165–179.
13. Yin · Oxide Met · 2003 · 60 · 31510.1023/A:1026023403600 ↗
14. R.C. Yin, Corr. Sci., in press.
15. J.R. Davis, Stainless Steel, ASM Specialty Handbook, ASM International, 1994.
16. R.C. Yin, Ph.D. Dissertation, King Fahd University of Petroleum and Minerals, Saudi Arabia, May 2002.
17. A. Roger Perkins, Carburization of high temperature alloys, behavior of high temperature alloys in aggressive environments, in: I. Kirman (Ed.), Proceedings of the International Conference, vol. 6, Petten, The Netherlands, 15–18 October 1979, The Metals Society, 1980, p. 617.
18. L.P. Hemmings, A.R. Perkins, Thermodynamic Phase Stability Diagrams for the Analysis of Corrosion Reactions in Coal Gasification/Combination Atmospheres, LMSC-D558238, March 28, 1977.
19. K. Hauffe, Oxidation of Metals, Plenum Press, New York, 1965.
20. J. Askill, Tracer Diffusion Data for Metals, Alloys, and Simple Oxides, IFI/Plenum Data Corporation, 1970.10.1007/978-1-4684-6075-9 ↗
21. Barnes · Oxide Met · 1985 · 24 · 33310.1007/BF00659598 ↗
22. O. Van der Biest, J.M. Harrison, J.F. Norton, Characterisation of protective layers formed in carburising environments, in: Proceedimgs of the Behavior of High Temperature Alloys in Aggressive Environments, Petten, The Netherlands, 15–18 October 1979, The Metals Society, London 1980, p. 681.
24. Yin · Oxide Met · 2003 · 60 · 10310.1023/A:1024669430565 ↗