Use of instrumented micro-indentation to study the mesoscopic elasto-plastic behavior of GH4145/SQ superalloy during high-temperature cyclic straining
Source abstract
Abstract
In this paper the instrumented micro-indentation testing (IIT) was used to study the mesoscopic elasto-plastic behavior of nickel-base superalloy GH4145/SQ subjected to cyclic straining at an elevated-temperature. For this purpose, a series of experiments including high-temperature low-cycle fatigue tests, instrumented micro-indentation measurements and OM (TEM) examinations were carried out. The characteristic parameters of indentation (C, hmax, S, hr, We and WP) during high-temperature fatigue failure process were determined from the experimental indentation load–depth (P–h) curves. The fatigue mesoscopic elasto-plastic properties such as E, σy and n were estimated using Dao et al.’s analysis algorithm [19], combined with the indentation characteristic parameters, and their distribution patterns were verified in a statistical sense. Microstructural examinations using both OM and TEM were performed to provide the micromechanisms for the fatigue mesoscopic elasto-plastic behavior of the superalloy during high-temperature low-cycle fatigue.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Surface Treatment and Residual Stress · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Lemaitre · 2005
2. Yang · Adv. Mechan. · 1992 · 22
3. Tryon · J. Eng. Mater. Technol.-Trans. ASME · 1997 · 119 · 30410.1115/1.2805975 ↗
4. Evans · Eng. Fract. Mech. · 1974 · 6 · 73510.1016/0013-7944(74)90070-8 ↗
5. Parks · Opt. Eng. · 1982 · 2l · 633
6. Ri · Measurement · 2010 · 50 · 501
7. Tatschl · Mater. Sci. Eng. A · 1997 · 234–236 · 944
8. Ogasawara · Scripta Mater. · 2006 · 54 · 6510.1016/j.scriptamat.2005.09.009 ↗
9. Oliver · J Mater. Res. · 1992 · 7 · 156410.1557/JMR.1992.1564 ↗
10. Ye · Mater. Sci. Eng. A · 2004 · 373 · 5410.1016/j.msea.2004.01.045 ↗
11. Ye · Int. J. Fatigue · 2005 · 27 · 110210.1016/j.ijfatigue.2005.01.014 ↗
12. Ye · J. Mater. Sci. · 2005 · 40 · 648310.1007/s10853-005-1548-0 ↗
13. Ye · J. Eng. Mater. Technol.-Trans. ASME · 2008 · 130 · 110.1115/1.2931148 ↗
14. D.Ye, H. Cha, L. Xiao, Y.Xu, J. Nucl. Mater. (under revision).
15. Giannakopoulos · Scripta Mater. · 1999 · 40 · 119110.1016/S1359-6462(99)00011-1 ↗
16. Ye · Mater. Sci. Eng. A · 2007 · 456 · 12010.1016/j.msea.2006.12.026 ↗
17. Oliver · J. Mater. Res. · 1992 · 7 · 156410.1557/JMR.1992.1564 ↗
18. Cheng · J. Appl. Phys. · 1998 · 84 · 128410.1063/1.368196 ↗
19. Dao · Acta Mater. · 2001 · 49 · 389910.1016/S1359-6454(01)00295-6 ↗
20. Valsan · Metall. Trans. · 1992 · 23A · 175110.1007/BF02804368 ↗
21. Ganesh Sundara Baman · Int. J. Fatigue · 1994 · 16 · 20910.1016/0142-1123(94)90005-1 ↗
22. Stoltz · Mater. Sci. Eng. A · 1978 · 34 · 27510.1016/0025-5416(78)90060-5 ↗
23. Lerch · Mater. Sci. Eng. · 1984 · 66 · 15110.1016/0025-5416(84)90177-0 ↗
24. Stephen Antolovich · Mater. Sci. Eng. A · 1981 · 47 · 4710.1016/0025-5416(81)90040-9 ↗
25. Singh · Metall. Trans. · 1991 · 22A · 49910.1007/BF02656817 ↗
26. Anthony Thompson · Acta Mater. · 1973 · 21 · 101710.1016/0001-6160(73)90158-2 ↗
27. Klesnil · 1980
28. Srivatsan · Int. J. Fatigue · 1991 · 13 · 31310.1016/0142-1123(91)90358-6 ↗
29. Srivatsan · Int. J. Fatigue · 1986 · 4 · 20110.1016/0142-1123(86)90022-8 ↗
30. Rashid · Mech. Mater. · 2007 · 39 · 78710.1016/j.mechmat.2007.02.001 ↗