journal article·2011-04

Self-consistent modeling of rolling textures in an austenitic–ferritic duplex steel

N. Jia, R. Lin Peng, Y.D. Wang, X. Zhao

Materials Science and Engineering: A· Volume 528· Issue 10-11
Publisher page

Abstract

Rolling textures of the constituent phases in an austenitic–ferritic duplex stainless steel are measured by X-ray diffraction experiments, showing that the brass-type texture, typical of f.c.c. materials with low SFE, is developed in the austenitic phase, and the rotated-cube and brass-R textures are developed in the ferritic phase. On the basis of the experimental texture components and fibers at different reductions, rolling textures of the respective phases in the duplex steel are simulated using a self-consistent model. After considering various micromechanical interactions within the steel, a reliable prediction of the evolution of grain orientation distributions for the phases at small reductions is achieved. An attempt in modeling the brass-type texture for the f.c.c. metallic phase is also performed by incorporating the shear banding mechanism into the presented model.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Liu · Acta Mater. · 2003 · 51 · 542510.1016/S1359-6454(03)00409-9 ↗
2. Van Houtte · Int. J. Plast. · 2005 · 21 · 58910.1016/j.ijplas.2004.04.011 ↗
3. Akdut · Scripta Metall. Mater. · 1995 · 32 · 10310.1016/S0956-716X(99)80020-X ↗
4. Bolmaro · Mater. Sci. Eng. A · 1994 · 175 · 11310.1016/0921-5093(94)91050-2 ↗
5. Belyakov · Acta Mater. · 2006 · 54 · 252110.1016/j.actamat.2006.01.035 ↗
6. Mecking · Mater. Sci. Forum · 1994 · 157–162 · 81310.4028/www.scientific.net/MSF.157-162.813 ↗
7. Leffers · Acta Metall. Mater. · 1990 · 38 · 191710.1016/0956-7151(90)90303-X ↗
8. Taylor · 1938 · 218
10. Hutchinson · Proc. R. Soc. Lond. A · 1976 · 348 · 10110.1098/rspa.1976.0027 ↗
11. Lebensohn · Acta Mater. · 1997 · 45 · 368710.1016/S1359-6454(97)00067-0 ↗
12. Yapici · Acta Mater. · 2006 · 54 · 375510.1016/j.actamat.2006.04.007 ↗
13. 1998
14. Jia · J. Phys: Condens. Matter · 2008 · 20
15. K. Pawlik, P. Ozga, LaboTex: The Texture Analysis Software, Göttinger Arbeiten zur Geologie und Paläontologie, SB4, 1999.
16. Jia · Mater. Sci. Eng. A · 2008 · 491 · 42510.1016/j.msea.2008.02.021 ↗
17. Hirsch · Acta Metall. · 1988 · 36 · 286310.1016/0001-6160(88)90172-1 ↗
18. Duggan · Metal. Sci. · 1978 · 12 · 34310.1179/030634578790433909 ↗
19. Van Houtte · Z. Metallkd. · 1979 · 70 · 426
20. Baczmański · Acta Mater. · 2004 · 52 · 113310.1016/j.actamat.2003.10.046 ↗
21. Tomé · Acta Mater. · 2001 · 49 · 308510.1016/S1359-6454(01)00190-2 ↗
22. Proust · Acta Mater. · 2007 · 55 · 213710.1016/j.actamat.2006.11.017 ↗
23. Aravas · Int. J. Plast. · 1991 · 7 · 14110.1016/0749-6419(91)90028-W ↗
24. Kocks · Acta Metall. · 1982 · 30 · 69510.1016/0001-6160(82)90119-5 ↗
25. Jia · Acta Mater. · 2008 · 56 · 78210.1016/j.actamat.2007.10.040 ↗
26. Wassermann · Z. Metallkd. · 1963 · 54 · 61
27. Paul · Metall. Mater. Trans. A · 2004 · 35 · 377510.1007/s11661-004-0283-5 ↗
28. Gil Sevillano · Scripta Metall. · 1977 · 11 · 58110.1016/0036-9748(77)90113-2 ↗
29. Kalidindi · Int. J. Plast. · 2001 · 17 · 83710.1016/S0749-6419(00)00071-1 ↗
30. Engler · Metall. Mater. Trans. A · 2000 · 31 · 229910.1007/s11661-000-0146-7 ↗
31. Lebensohn · Acta Mater. · 2009 · 57 · 140510.1016/j.actamat.2008.10.057 ↗