journal article·2015-03

In-situ neutron diffraction measurement of stress redistribution in a dissimilar joint during heat treatment

M.F. Dodge, M.F. Gittos, H. Dong, S.Y. Zhang, S. Kabra, J.F. Kelleher

Publisher page

Abstract

Abstract Neutron diffraction is routinely used to monitor stress redistribution before and after heat treatment in dissimilar joints. However there remains a paucity of information concerning the evolution of strain throughout the process of heat treatment itself. Due to different mechanical properties between opposing sides, a competitive strain redistribution process occurs. Consequently, a novel in-situ measurement approach has been developed: strains at multiple points in a dissimilar joint have been measured during heat treatment. Thus, the described work elucidates areas within the thermal cycle in which competitive strain redistribution occurs, and where high residual stresses remain, following PWHT. The method may be used to characterise comparable material combinations, with a view to optimising the thermal cycles, and ultimately, the structural integrity of dissimilar joints.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Non-Destructive Testing Techniques · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. CEGB, Assessment of the Integrity of Structures Containing Defects R/H/R6, UK, 2001.
2. British Standards Institution, Guide to methods for assessing the acceptability of flaws in metallic structures, vol. 3, no. 1, 2005.
3. J.D. Burk, C.L. Ribardo, B.P. America, Thunder horse – materials, welding and corrosion challenges and solutions, in: Proc. 2010 Offshore Technology Conference, 2010.
4. P.E. Kvaale, G. Rorvik, Experience with qualification and use of stainless steels in Subsea Pipelines, in: Kvaale P. and Rorvik G., Proceedings of the 23rd International Conference on Offshore Mechanics & Arctic Engineering, 2004.10.1115/OMAE2004-51536 ↗
5. M.F. Gittos, Resistance of dissimilar joints between steel and nickel alloys to hydrogen-assisted cracking, in: NACE, 2008, pp. NACE2008–08095.10.5006/C2008-08095 ↗
6. M.F. Dodge, H.B. Dong, M. Milititsky, Environment-induced cracking in weld joints in subsea oil and gas systems—part II, in: Proceedings of the 32nd International Conference on Ocean, Offshore and Arctic Engineering, 2013.10.1115/OMAE2013-10339 ↗
7. Fenske · Metall. Mater. Trans. A · 2012 · 43 · 301110.1007/s11661-012-1129-1 ↗
8. K. Sotoudeh, S.Y. Zhang, S.E. Eren, S. Kabra, M. Milititsky, and M.F. Gittos, Evaluation of residual stresses in steel-to-nickel dissimilar joints, in: Proceedings of the 32nd International Conference on Ocean, Offshore and Arctic Engineering, 2013, pp. 1–16.10.1115/OMAE2013-11192 ↗
9. Skouras · Int. J. Press. Vessel. Pip. · 2013 · 101 · 14310.1016/j.ijpvp.2012.11.002 ↗
10. Chen · Mater. Sci. Eng.: A · 2014 · 590 · 37410.1016/j.msea.2013.10.060 ↗
11. Spooner · 2003 · 296
12. Withers · J. Appl. Crystallogr. · 2007 · 40 · 89110.1107/S0021889807030269 ↗
13. Hutchings · 2005
14. Daymond · J. Appl. Phys. · 1997 · 82
15. Johnson · J. Appl. Crystallogr. · 2002 · 35 · 4910.1107/S002188980101891X ↗
16. Karjalainen · Z. Met. · 1979 · 70 · 686