Correlation of metal injection moulded Ti6Al4V yield strength with resonance frequency (PCRT)measurements
Source abstract
Abstract
Abstract The non-destructive Process Compensated Resonance Testing (PCRT) methodology has been used to inspect Ti6Al4V (Ti-64) specimens fabricated by metal injection moulding (MIM). The purpose of this study has been to determine whether PCRT can be used as a non-destructive testing method to evaluate the performance of MIM samples and to use the resonant data to test whether PCRT can be closely correlated to the yield strength, which is represented in this study by the offset 0.2% proof stress. In order to do this, resonant frequencies and correlations between the results of the PCRT method and the destructive mechanical test were studied to evaluate performance of the samples. A good performance of the PCRT system was achieved and the results were used to predict the 0.2% proof stress of MIM Ti-64 samples. Correlation analysis results showed that the total variation in 0.2% proof stress that can be attributed to resonant frequencies was above 95% for MIM tensile specimens.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced machining processes and optimization · Injection Molding Process and Properties · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Shibo · J. Mater. Process. Technol · 2006 · 173 · 31010.1016/j.jmatprotec.2005.12.001 ↗
2. Petzoldt · PIM Int. · 2012 · 6 · 31
3. Sago · Powder Metall · 2012 · 48 · 41
4. Sidambe · PIM Int. · 2010 · 4 · 56
5. Ferri · Mater. Sci. Eng. A · 2009 · 504 · 10710.1016/j.msea.2008.10.039 ↗
6. A.T. Sidambe, W. Xu, I.A. Figueroa, H.G.C. Hamilton, I. Todd, Proceedings of the Euro PM2008 Congress, EPMA, Mannheim, vol. 2, 2008, pp. 275–280.
7. F.H. Froes Developments in Titanium P/M, Institute for Materials and Advanced Processes (IMAP), Moscow, 2005, 〈http://www.webs1.uidaho.edu/imap/MPR%20Paper.pdf〉 (accessed July 2012).
8. Migliori · 1997
9. Stetson · Exp. Tech. · 2011 · 35 · 8010.1111/j.1747-1567.2010.00679.x ↗
10. VIBRANT NDT. Process Compensated Resonance Testing for Aerospace Components, Albuquerque, 〈http://www.vibrantndt.co.uk/files/PCR-Aerospace-White-Paper.pdf〉 (accessed, July 2012).
11. ASTM E2534-10: Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts, American Society for Testing Materials (ASTM) International, West Conshohocken, PA, 2010.
12. Schwarz · Mater. Eval. · 2005 · 63 · 736
13. G. Bolu, A. Gachagan, G. Pierce, G. Harvey, L. Choong, Proceedings of the AIP Conference, American Institute of Physics, San Diego, 2010, pp.1654–1661.10.1063/1.3362267 ↗
14. Dieter · 1961
15. R. Nath, J. Schwarz, M. Kimber Johnson, J. Saxton, Proceedings of the 2004 International Conference on Powder Metallurgy and Particulate Materials (PM2TEC 2004), vol. 3, MPIF, Chicago, 2004.
16. S. Singh, L. Juariqui, E. Biedermann et al., Proceedings of the AIP Conference, American Institute of Physics, San Diego, vol. 1335, 2010, pp.1355–1362.
17. L.J. Hunter, L.M. Jauriqui, G.D. Gatewood, R. Sisneros, Proceedings of the AIP Conference, Burlington, 2012, pp.1137–1144.10.1063/1.4716348 ↗
18. S. Singh, L. Juariqui, T. Sloan, Proceedings of the AIP Conference, American Institute of Physics, San Diego 2010, pp.1670–1677.10.1063/1.3362888 ↗
19. Bono · PIM Int. · 2010 · 4 · 53
20. Sidambe · Int. J. Powder. Metall. · 2011 · 47 · 21
21. Sidambe · IOP Conf. Ser.: Mater. Sci. Eng. · 2011 · 2610.1088/1757-899X/26/1/012005 ↗
22. ASTM E2001-08: Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-Metallic Parts, American Society for Testing and Materials (ASTM) International, West Conshohocken, PA, 2008.
23. Mitchell · J. Am. Stat. Assoc. · 1988 · 83 · 102310.1080/01621459.1988.10478694 ↗
24. L. Jauriqui, L. Hunter, Proceedings of the AIP Conference, American Institute of Physics, San Diego, vol. 1335, 2010, pp.997–1004.
25. Nath · 2011
26. ASTM F2885-11: Standard Specification for Metal Injection Molded Titanium–6Aluminum–4Vanadium Components for Surgical Implant Applications, American Society for Testing Materials (ASTM) International, West Conshohocken, PA, , 2011.
27. Malinov · Comput. Mater. Sci. · 2001 · 21 · 37510.1016/S0927-0256(01)00160-4 ↗
28. Sidambe · Key Eng. Mater. · 2012 · 520 · 14510.4028/www.scientific.net/KEM.520.145 ↗