journal article·2005-05

Strain hardening mechanisms in aged AEREX350 superalloy

Hamidreza Najafi, Sirous Asgari

Materials Science and Engineering: A· Volume 398· Issue 1-2
Publisher page

Abstract

Abstract In this paper, results of an investigation on strain hardening mechanisms of aged AEREX350 alloy during room temperature compression testing are reported. TEM studies were conducted on commercial samples aged at 850 °C both before and after deformation in a strain range of 0.15–0.27. It was found that only coherent γ′ precipitates with L12 structure formed in these samples prior to deformation. TEM studies also showed twin intersections in the deformed samples. Based on these observations, it is suggested that the high strain hardening rate of the aged material in this strain range is mainly related to the formation of intersecting deformation twins. This is attributed to the decrease in the matrix stacking fault energy due to the precipitation of high-nickel-content γ′ phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. G.D. Smith, U.S. Patent No. 3356542, 1976.
2. R.P. Singh, Structure of thermo-mechanically processed multiphase alloys, Ph.D. thesis, Drexel University, 1987.
3. R.D. Doherty, R.P. Singh, Alloys containing gamma prime phase and process for forming same, U.S. Patent No. 4908069, 1990.
4. R.D. Doherty, R.P. Singh, J.S. Slaney, Nickel–cobalt based alloys, U.S. Patent No. 4931255, 1990.
5. R.D. Doherty, R.P. Singh, Alloys containing gamma prime phase and particles and process for forming same, U.S. Patent No. 5169463, 1992.
6. Asgari · Metall. Mater. Trans. · 1997 · 28A · 178110.1007/s11661-997-0109-3 ↗
7. Asgari · Acta Mater. · 1998 · 46 · 579510.1016/S1359-6454(98)00235-3 ↗
8. Singh · Metall. Mater. Trans. · 1992 · 23A · 30710.1007/BF02660873 ↗
9. Singh · Metall. Mater. Trans. · 1992 · 23A · 32110.1007/BF02660874 ↗
10. El-Danaf · Int. J. Plast. · 2001 · 17 · 124510.1016/S0749-6419(00)00090-5 ↗
11. Shaji · Mater. Sci. Eng. · 1999 · A272 · 37110.1016/S0921-5093(99)00502-X ↗
12. Graham · Metall. Trans. · 1970 · 1 · 42310.1007/BF02811551 ↗
13. Raghavan · Metall. Trans. · 1980 · 11A · 20310.1007/BF02700461 ↗
14. Raghavan · Scripta Met. · 1980 · 14 · 100910.1016/0036-9748(80)90376-2 ↗
15. Asgari · J. Mater. Process. Technol. · 2001 · 118 · 24610.1016/S0924-0136(01)00983-9 ↗
16. Metals Test Methods and Analytical Procedures, vol. 03.01, Annual Book of ASTM Standards, 1994.
17. Honeycombe · 1985
18. Ham · 1970
19. Brown · 1971
20. Raynor · Met. Sci. J. · 1970 · 4 · 12110.1179/msc.1970.4.1.121 ↗
21. Mahajan · Acta Metall. · 1973 · 21 · 135310.1016/0001-6160(73)90085-0 ↗
22. Mahajan · Acta Metall. · 1974 · 22 · 111310.1016/0001-6160(74)90066-2 ↗
23. Remy · Acta Metall. · 1977 · 25 · 71110.1016/0001-6160(77)90013-X ↗
24. Remy · Acta Metall. · 1978 · 26 · 44310.1016/0001-6160(78)90170-0 ↗
25. Remy · Metall. Trans. · 1981 · 12A · 38710.1007/BF02648536 ↗
26. Christian · Prog. Mater. Sci. · 1995 · 39 · 110.1016/0079-6425(94)00007-7 ↗
27. Kear · Metall. Trans. · 1970 · 1 · 247710.1007/BF03038373 ↗
28. M. Safarzadeh, MS Thesis, Sharif University of Technology, 2004.
29. Venables · J. Phys. Chem. Solids · 1964 · 25 · 69310.1016/0022-3697(64)90178-7 ↗
30. El-Danaf · Metall. Mater. Trans. · 1999 · 30A · 122310.1007/s11661-999-0272-9 ↗
31. Rohatgi · Metall. Mater. Trans. · 2001 · 32A · 13510.1007/s11661-001-0109-7 ↗
32. F. Hamdi, MS Thesis, Sharif University of Technology, 2004.