journal article·2007-06

Fluxless bonding of silicon to Ag-cladded copper using Sn-based alloys

Jong S. Kim, Takehide Yokozuka, Chin C. Lee

Materials Science and Engineering: A· Volume 458· Issue 1-2
Publisher page

Abstract

Abstract A fluxless bonding process of silicon to Ag-cladded copper using Sn-rich Sn–Au multilayer structure is developed. By adding an annealing step, the melting temperature of the joint structure can increase beyond to 700 °C. The silver cladding on the copper substrate is used as a stress buffer. Silicon chips of 5 mm × 5 mm are bonded onto Ag-cladded copper substrates using electroplated Sn-rich Sn–Au structure. The Si chips are coated with two different designs of under bump metallurgy (UBM), Si/Cr/Au and Si/Cr/Ni/Au, respectively. To achieve high quality joint with few voids, the fluxless bonding process is performed in vacuum environment (100 mTorr) to suppress tin oxidation. Comparing to bonding in air, the oxygen content is reduced by a factor of 7600. Nearly void-free solder joints are made. Using Cr/Au UBM structure, initial joints are found to consist of three distinct layers, i.e. Sn-rich layer, Ag 3 Sn intermetallic compound, and Ag layer. Using a new UBM design of Si/Cr/Ni/Au, very high quality joints are produced. By a proper annealing step, high melting temperature is achieved. Microstructure and composition of the joints are studied using optical microscope and scanning electron microscope (SEM) with energy dispersive X-ray spectroscopy (EDX). The bonding result shows our initial success in overcoming the very large mismatch in thermal expansion between silicon of 3 ppm/°C and copper of 17 ppm/°C. Reliability evaluation is underway.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Semiconductor materials and interfaces · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Tummala · 1997
2. 1995
3. White · J. Phys. D: Appl. Phys. · 1973 · 6 · 207010.1088/0022-3727/6/17/313 ↗
4. 1994
5. Beelen-Hendrikx · 2002 · 11
6. Lee · IEEE Trans. Compon. Hybr. Manuf. Technol. · 1991 · 14 · 40710.1109/33.87322 ↗
7. Matijasevic · Thin Solid Films · 1993 · 223 · 27610.1016/0040-6090(93)90533-U ↗
8. Chuang · IEEE Trans. Compon. Pack. Technol. · 2002 · 25 · 45310.1109/TCAPT.2002.801113 ↗
9. Kim · Mater. Sci. Eng. A · 2004 · 372 · 26110.1016/j.msea.2004.01.009 ↗
10. Kim · Mater. Sci. Eng. A · 2005 · 393 · 31510.1016/j.msea.2004.11.022 ↗
11. Eastman · IEEE Spectrum · 2002 · 2810.1109/6.999791 ↗
12. Johnson · IEEE Electron Device Lett. · 2004 · 25 · 45910.1109/LED.2004.831190 ↗
13. 1973 · vol. 8 · 256
14. Kovács · Int. J. Plasticity · 1996 · 12 · 3510.1016/S0749-6419(95)00043-7 ↗
15. 1987