Bending properties of functionally graded 300M steels
Source abstract
Abstract
The bending behavior of compositionally-graded martensitic steel was investigated in partially decarburized sheets of alloy 300M. The best combination of strength and bendability was obtained when the thickness of the inner hard core was reduced to one third of the sheet thickness. The improved bending behavior of the compositionally-graded sheet is attributed to (a) the suppression of crack propagation by introducing a more ductile phase at the surface and (b) the spreading of plasticity along the circumferential direction as a result of the presence of a yield stress gradient in the thickness direction. The bendability of the graded material was limited by the initiation and rapid propagation of fracture within the hard core of the sheet. Unlike traditional materials in which the springback angle increases remarkably with increasing yield strength, the compositionally graded material had a small springback angle which is comparable to that of steels having a low yield stress similar to that of the soft decarburized surface layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal and Thin Film Mechanics · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Heterogeneous and architectured materials: a possible strategy for design of structural materials10.1002/adem.200700289 ↗
2. Criteria for selecting the components of composites10.1016/0956-7151(93)90242-K ↗
3. Designing highly toughened hybrid composites through nature-inspired hierarchical complexity10.1016/j.actamat.2009.03.003 ↗
4. Compositionally graded steels: a strategy for materials development10.1002/adem.200900180 ↗
5. Steel-based composites: driving forces and classifications10.1146/annurev-matsci-070909-104438 ↗
6. Compositionally graded steels: the effect of partial decarburization on the mechanical properties of spherodite and pearlite10.1016/j.msea.2008.01.062 ↗
7. The mechanical response of compositionally graded materials10.1016/j.msea.2006.12.164 ↗
8. Mechanical behavior of a compositionally graded 300M steel10.1016/j.msea.2013.04.006 ↗
9. Analysis of stamping performances of dual phase steels: a multi-objective approach to reduce springback and thinning failure10.1016/j.matdes.2009.04.001 ↗
10. Characterising material and process variation effects on springback robustness for a semi-cylindrical sheet metal forming process10.1016/j.ijmecsci.2010.09.009 ↗
11. Measurement of springback10.1016/S0020-7403(01)00082-0 ↗
12. Effect of the material-hardening mode on the springback simulation accuracy of V-free bending10.1016/S0924-0136(02)00055-9 ↗
13. Determination of spring-back of stainless steel sheet metal in “V” bending dies10.1016/j.matdes.2007.04.004 ↗
14. Marciniak · 1992 · 68
15. Failure analysis of fusion clad alloy system AA3003/AA6xxx sheet under bending10.1016/j.msea.2014.05.047 ↗