The analysis of deformation size effects using multiple gauge length extensometry and the essential work of rupture concept
Source abstract
Abstract
Size dependence of the load–displacement and stress–strain curves is a phenomenon widely reported in the literature and readily observed in experiments. The present paper introduces two developments in the analysis of ductile rupture, one in the area of experimental technique and interpretation, and one in the area of numerical modelling. Firstly, the new experimental technique is described of multiple gauge length optical extensometry (laser scanning) that provides a uniquely powerful means of collecting the data needed for the study of size effects, from a single tensile test on a ductile specimen. The interpretation procedures are presented based on the considerations about the nature of deformation and energy expenditure within different material volumes in a tensile specimen. Consequently, the property of the specimen can be defined and identified that relates to the energy consumption per unit cross-sectional area required to rupture the specimen entirely (the essential work of rupture). Another energetic measure is also obtained from the test that relates to the plastic work dissipation per unit volume in pre-peak deformed material. Secondly, the observed size effects and specific energy determination procedures are discussed in the context of non-local coupled plasticity-damage modelling. Conventional local numerical models of inelastic deformation fail to predict the sequence of deformation responses observed in the tensile test, namely, uniform deformation followed by strain localisation, necking and rupture. It is shown here that coupled non-local damage-plasticity modelling is capable of capturing the hardening–softening and global–local plasticity transitions, and hence the trends observed in ductile fracture. The predictions of the coupled non-local damage-plasticity modelling for different deformation regimes are shown to agree qualitatively with the experimentally observed behaviour. The two aspects of the proposed approach, experimental and modelling, are presented here together since they are intimately linked at the fundamental level. The implications of the proposed approach are discussed for the deformation analysis of plastically deforming and damageable materials and structures at various scales, from macroscopic to miniature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Advanced Surface Polishing Techniques · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. The essential work of plane stress ductile fracture10.1007/BF00040143 ↗
2. On the essential and non-essential work of fracture of biaxial-oriented filled PET film10.1016/0032-3861(96)85355-9 ↗
3. Effect of temperature on fracture toughness of an amorphous poly(ether–ether ketone) film using essential work of fracture analysis10.1016/S0142-9418(02)00162-9 ↗
4. Determination of essential work of necking and tearing from a single tensile test10.1007/s10704-005-4483-9 ↗
5. Bažant · 2002
6. Carpinteri · 1995 · 581
7. Karihaloo · 1995
8. G.D. Nguyen, D.Phil. Thesis, Department of Engineering Science, University of Oxford, 2005.
9. Analysis of essential work of rupture using non-local damage-plasticity modelling10.1007/s10704-005-4391-z ↗
10. A thermodynamics-based formulation of gradient-dependent plasticity10.1016/S0997-7538(98)80003-X ↗
11. A thermodynamically consistent formulation of nonlocal and gradient plasticity10.1016/S0093-6413(98)00009-3 ↗