journal article·2001-02

Aluminium nitride by plasma spraying of an Al2O3–C–Sm2O3 system

K.A Khor, F.Y.C Boey, X.L Zhao, L.H Cao

Materials Science and Engineering: A· Volume 300· Issue 1-2
Publisher page

Abstract

Abstract Increasing demand for high performance ceramic dielectric substrate materials has led to the use of AlN due to its high thermal conductivity, low dielectric constant and co-efficient of thermal expansion (CTE) compatibility with that of silicon. This paper reports on a thermal plasma spraying process which enhanced the reactivity of an Al2O3–C–Sm2O3 system so that subsequent heating at 1400°C was sufficient to fully convert it to hexagonal AlN spherical particles with a particle size of about 2.45 μm. It was thought that the increase in reactivity was due both to the formation of the integrated composite powder by plasma spraying, which reduced the overall endothermic heat required for the nitridation reaction, and the liquid phase sintering effect of SmAlO3 during the process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Semiconductor materials and devices · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Boey · J. Mater. Sci. (Microelectron.) · 1999 · 10 · 110.1023/A:1008956321727 ↗
2. Kolker · CFI Ceram. Forum Int. · 1988 · 65 · 75
3. Werdecker · IEEE Trans. Comp. Hybrids Manuf. Technol. · 1984 · 7 · 39910.1109/TCHMT.1984.1136380 ↗
4. Disson · Ind. Ceram. · 1991 · 863 · 603
5. Knudsen · Am. Ceram. Soc. Bull. · 1995 · 74 · 97
6. Jean-Marie Haussonne · Mater. Manuf. Process. · 1995 · 10 · 71710.1080/10426919508935062 ↗
7. Mroz · J. Am. Ceram. Soc. Bull. · 1992 · 71 · 782
8. S. Ito, N. Yoneda, Japanese Patient No. 6217161, 1987.
9. Kim · J. Am. Ceram. Soc. · 1996 · 79 · 264510.1111/j.1151-2916.1996.tb09029.x ↗
10. Kuramoto · Am. Ceram. Soc. · 1989 · 26 · 107
11. F. Boey, L. Cao, K.A. Khor, I.Y. Tok, Acta Materialia, in press.
12. Boey · Mater. Process. Technol. · 1999 · 89–90 · 47810.1016/S0924-0136(99)00134-X ↗
13. Hausonne · Am. Ceram. Soc. Bull. · 1993 · 72 · 84
14. Weimer · J Am. Ceram. Soc. · 1994 · 77 · 310.1111/j.1151-2916.1994.tb06951.x ↗
15. Moura · J. Am. Ceram. Soc. · 1997 · 80 · 2425
16. Kim · J. Am. Ceram. Soc. · 1996 · 79 · 264510.1111/j.1151-2916.1996.tb09029.x ↗
17. Kim · J. Mater. Sci. · 1996 · 31 · 160310.1007/BF00357870 ↗
18. Jung · J. Mater. Sci. Lett. · 1997 · 16 · 157310.1023/A:1018512300555 ↗
19. Selvaduray · Mater. Sci. Technol. · 1993 · 9 · 46310.1179/mst.1993.9.6.463 ↗
20. Sieers · Ceram. Eng. Sci. Proc. · 1985 · 6 · 89610.1002/9780470320280.ch43 ↗
21. Boc · Rev. Int. Hautes Temp. Refract. · 1981 · 18 · 85
22. E. Pfender, Fundamental studies associated with the plasma spray process, in: D.L. Houck (Ed.), Thermal Spray — Advances in Coating Technology, Orlando, Florida, USA, (Conf. Proc.), 1988, pp. 1–10.10.1016/0257-8972(88)90083-7 ↗
23. Mcpherson · J. Mater. Sc. · 1973 · 8 · 85110.1007/BF02397914 ↗
24. LaPierre · Ceram. Eng. Sci. Proc. · 1991 · 12 · 120110.1002/9780470313831.ch22 ↗