Processing and mechanical properties of bulk nanostructured nickel-based alloys
Source abstract
Abstract
Abstract The present paper deals with investigation of nanocrystalline (NC) nickel-based alloys processed by severe plastic deformation via multi-axis forging and high-pressure torsion. The nickel-based alloys Ni–20%Cr, PDS and Inconel 718 with a mean grain size of 50–80 nm have been studied in terms of their thermal stability and mechanical properties. The NC structure is characterized by higher internal stress and microhardness than a coarse-grained alloy. It was established that the NC structure of Ni–20%Cr alloy can be considered as thermally stable up to 500 °C (0.46 T m ), which is lower than the temperature threshold for the retention of NC structure in Inconel 718 (580 °C = 0.5 T m ). The increase of annealing temperature of these alloys up to 600 °C causes static recrystallization and transformation of a NC structure into a submicrocrystalline one. It has been established that Inconel 718 with the NC structure displays superplasticity at 600 °C under a strain rate of 1.5 × 10 −4 s −1 . The values of relative elongation and strain rate sensitivity coefficient m are 350% and 0.37, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (7)
Show source-provided references
1. Kaibyshev · 1992
2. Salishchev · Nanostruct. Mater. · 1995 · 6 · 91310.1016/0965-9773(95)00208-1 ↗
3. Ivanisenko · Nanostruct. Mater. · 1995 · 6 · 43310.1016/0965-9773(95)00089-5 ↗
4. 2001
5. 1993
6. Utyashev · Ann. Chim.: Sci. Mater. · 1996 · 21 · 379
7. 1995