journal article·2004-07

Magnetic properties of bulk amorphous FeAlGaPCBSi samples prepared by ball-milling and subsequent hot pressing

J. Degmova, S. Roth, J. Eckert, H. Grahl, L. Schultz

Publisher page

Abstract

Abstract Bulk amorphous FeAlGaPCBSi samples in the shape of discs (diameter of 10 mm and thickness of 3 mm) were prepared from melt-spun ribbons by high-energy ball milling and subsequent compaction of the resulting powder in the supercooled liquid region ΔTx. The stability against crystallization as well as the low viscosity in this region allow to prepare bulk specimens by combination of pressing and heating while the amorphous structure of samples is still maintained. Heating of the powder in the ΔTx region allows to reduce the stress induced in the material during ball-milling. This milling-induced stress causes significant differences in coercivity: the relatively low coercivity characteristic for the melt-spun ribbons (5–10 A m−1) increases after 1 h of ball milling to values of about 550–2300 A m−1. Subsequent heating of the ball-milled powders in the supercooled liquid region leads to a decrease of Hc to values between 9.5 and 250 A m−1. The bulk samples prepared by combination of compaction and heating (hot pressing) show a coercivity of about 11.6–127 A m−1.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Phase-change materials and chalcogenides · Mineralogy and Gemology Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Inoue · Mater. Trans. JIM · 1996 · 37 · 3210.2320/matertrans1989.37.32 ↗
2. Inoue · Mater. Trans. JIM · 1995 · 36 · 128210.2320/matertrans1989.36.1282 ↗
3. Inoue · Mater. Sci. Eng. A · 1997 · 226–228 · 35710.1016/S0921-5093(97)80049-4 ↗
4. Mizushima · IEEE Trans. Mag · 1997 · 33 · 378410.1109/20.619571 ↗
5. Mizushima · J. Appl. Phys · 1998 · 83 · 632910.1063/1.367812 ↗
6. Zhang · Mater. Trans. JIM · 1997 · 38 · 102710.2320/matertrans1989.38.1027 ↗
7. Inoue · J. Appl. Phys · 1997 · 81 · 402910.1063/1.364926 ↗
8. Inoue · Mater. Trans. JIM · 1997 · 38 · 18910.2320/matertrans1989.38.189 ↗
9. Inoue · Mat. Sci. Eng. A · 1997 · 226–228 · 35710.1016/S0921-5093(97)80049-4 ↗
10. Inoue · Mater. Trans. JIM · 1997 · 38 · 57710.2320/matertrans1989.38.577 ↗
11. Inoue · Mater. Sci. Forum · 2000 · 343–346 · 81
12. Mizushima · Mater. Trans. JIM · 1999 · 40 · 101910.2320/matertrans1989.40.1019 ↗
13. Inoue · Appl. Phys. Lett · 1997 · 71 · 46410.1063/1.119580 ↗
14. Gebert · Acta Mater · 1998 · 46 · 547510.1016/S1359-6454(98)00187-6 ↗
15. Shen · Appl. Phys. Lett · 1999 · 75 · 4029
16. J. Eckert, N. Schlorke, C.A.R.T. Miranda, L. Schultz, in: C.M. Ward-Close et al. (Eds.), Synthesis and Processing of Light Weight Metalic Materials II, Warrendale: The Minerals Metals and Materials Society, 1997, p. 383.
17. Seidel · Mater. Sci. Forum · 1996 · 119 · 225
18. Schlorke · J. Phys. D: Appl. Phys · 1999 · 32 · 85510.1088/0022-3727/32/8/003 ↗
19. Eckert · Mater. Sci. Forum · 1999 · 3–12 · 312
20. Eckert · Mater. Trans. JIM · 1998 · 39 · 62310.2320/matertrans1989.39.623 ↗
21. N. Schlorke, J. Eckert, L. Schultz, in: B.L. Mordike, K.U. Kainer (Eds.), Magnesium Alloys and Their Applications, Werkstoff-Informationsgesellschaft, Frankfurt, 1998, p. 533.
22. Weiß · Mater. Sci. Forum · 2000 · 343–346 · 12910.4028/www.scientific.net/MSF.343-346.129 ↗
23. Schlorke-de Boer · J. Appl. Phys · 2002 · 91 · 660710.1063/1.1471391 ↗
24. Stoica · Mater. Trans. JIM · 2002 · 43 · 196610.2320/matertrans.43.1966 ↗
25. Degmova · Nanocryst. Mater · 2002 · 12 · 81
26. T. Mizushima, K. Ikarashi, S. Yoshida, A. Makino, A. Inoue, in: J.V. Wood, L. Schultz, D.M. Herlach (Eds.). Materials Development and Processing-Bulk Amorphous Materials, Undercooling and Powder Metallurgy, Euromat 99-Volue 8, Wiley–VCH–Verlag, Weinheim, 2000, p. 46.10.1002/3527607277.ch8 ↗