Analysis of microstructure formation in gas-atomised Al–12wt.% Sn–1wt.% Cu alloy powder
Source abstract
Abstract
Abstract The microstructure of gas-atomised Al–12 wt.% Sn–1 wt.% Cu alloy powder has been investigated using scanning and transmission electron microscopy. Powder particles above approximately 8 μm in diameter exhibited a cellular–dendritic solidification morphology comprising α-Al dendrites and interdendritic Sn. In smaller powder particles, with diameters less than approximately 8 μm, the microstructure comprised an α-Al matrix with a dispersion of sub-micron Sn particles. The size of the dispersed Sn phase decreased with decreasing powder size (i.e. increased cooling rate). The formation of this dispersed phase microstructure is explained by the existence of a metastable liquid-phase miscibility gap in the system such that the reaction L → L 1 + L 2 occurred prior to the onset of solidification in particles below 8 μm in size. A heat transfer analysis was used to estimate the undercooling for the nucleation of α-Al in droplets cooled at different rates. The nucleation undercooling predicted for an 8 μm diameter droplet was 260 K and this represents a critical value which must be exceeded to enter the immiscibility region. The above value is in reasonable agreement with the temperature of the metastable immiscibility boundary, calculated from thermodynamic data, which occurs at an undercooling of approximately 280 K for Al–12 wt.% Sn.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Nakagawa · Acta Metall. · 1958 · 6 · 70410.1016/0001-6160(58)90061-0 ↗
2. Perepezko · 1983 · 223
3. Lu · Mater. Sci. Eng. · 2002 · A313 · 198
4. Munitz · J. Mater. Sci. · 1991 · 26 · 645810.1007/BF02387830 ↗
5. Cao · Scripta Mater. · 2003 · 48 · 510.1016/S1359-6462(02)00307-X ↗
6. Sun · J. Alloys Compd. · 2001 · 319 · 26610.1016/S0925-8388(01)00897-0 ↗
7. Munitz · Metall. Trans. A · 1992 · 23A · 181710.1007/BF02804374 ↗
8. Munitz · J. Mater. Sci. · 1998 · 33 · 363910.1023/A:1004663530929 ↗
9. Munitz · Metall. Trans. B · 1987 · 18B · 56510.1007/BF02654269 ↗
10. Van Aken · Acta Metall. · 1985 · 33 · 96310.1016/0001-6160(85)90190-7 ↗
11. Elmer · Acta Metall. Mater. · 1994 · 42 · 106510.1016/0956-7151(94)90124-4 ↗
12. Yamauchi · J. Mater. Sci. · 1998 · 33 · 37110.1023/A:1004319829612 ↗
13. Ichinosde · Scripta Metall. · 1985 · 19 · 510.1016/0036-9748(85)90255-8 ↗
14. Kim · Mater. Sci. Eng. · 1991 · A314 · 113310.1016/0921-5093(91)90940-O ↗
15. Kim · J. Mater. Sci. · 1991 · 26 · 286810.1007/BF01124815 ↗
16. McLean · J. Mater. Sci. · 1974 · 9 · 110410.1007/BF00552825 ↗
17. Tiller · J. Appl. Phys. · 1963 · 34 · 275710.1063/1.1729806 ↗
18. Ashby · Acta Metall. · 1968 · 16 · 108110.1016/0001-6160(68)90043-6 ↗
19. Kong · Mater. Sci. Eng. A · 2005 · 403 · 20510.1016/j.msea.2005.04.051 ↗
20. Perrin · 2004 · 1371
21. Harris · Mater. Sci. Forum · 2000 · 331–337 · 51910.4028/www.scientific.net/MSF.331-337.519 ↗
22. Kong · Mater. Sci. Technol. · 2003 · 19 · 100310.1179/026708303225004684 ↗
23. Predel · 1991 · vol. 5
24. Yule · 1994
25. 1992 · vol. 5 · 23
26. Ranz · Chem. Eng. Prog. · 1952 · 48 · 173
27. Adkins · Mater. Sci. Technol. · 1991 · 7 · 33410.1179/mst.1991.7.4.334 ↗
28. Lemmon · 2005
29. Jones · 1982
30. Stone · Int. J. Rapid Solid. · 1992 · 7 · 177
31. Levi · Metall. Trans. A · 1988 · 19A · 69910.1007/BF02649284 ↗