Spray forming and subsequent forging of γ-titanium aluminide alloys
Source abstract
Abstract
Abstract Spray forming experiments with a binary Ti–48.9Al (at.%) alloy and an advanced γ-TiAl alloy with the composition Ti–47Al–4(Nb, Mn, Cr, Si, B) (at.%), designated as γ-TAB, were carried out. Subsequently, the spray formed materials were forged. The sprayed and forged conditions were characterized in terms of microstructure, porosity, and impurity content. Tensile properties were evaluated at room and elevated temperatures. Upon forging the microstructures turned from nearly lamellar to near γ with a grain size of 4.9 μm (Ti–48.9Al) and from duplex to near γ with a grain size of 2.2 μm (γ-TAB) owing to dynamic recrystallization. The porosity of the spray formed materials almost vanished after forging. The room temperature (RT) tensile strength was improved due to the significant microstructural refinement. The sprayed and forged γ-TAB alloy sustains an elongation of 120% at 800 °C indicating the possibility of superplastic forming. The results are discussed in comparison with conventionally P/M-processed and hot isostatically pressed materials of the same composition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Kim · J. Metals · 1994 · 46 · 30
2. Appel · Mater. Sci. Eng. R · 1998 · 22 · 18710.1016/S0927-796X(97)00018-1 ↗
3. Semiatin · 1995 · 509
4. Gerling · 1992 · 1025
5. Choi · Acta Metall. Mater. · 1990 · 38 · 222510.1016/0956-7151(90)90090-4 ↗
6. Schimansky · Intermetallics · 1999 · 7 · 127510.1016/S0966-9795(99)00041-2 ↗
7. Gerling · 1999 · 273
8. Liu · Scr. Mater. · 1999 · 40 · 60110.1016/S1359-6462(98)00493-X ↗
9. Li · 1997 · 331
10. Morris · Scr. Met. Mater. · 1992 · 27 · 164510.1016/0956-716X(92)90159-C ↗
11. Mathur · Acta Metall. · 1989 · 37 · 42910.1016/0001-6160(89)90227-7 ↗
12. Gerling · 1999 · 10 · 222
13. Gerling · 2000 · 355
14. Clemens · Z. Metallkd. · 1995 · 86 · 814
15. Clemens · 1995 · 555
16. Clemens · 1999 · 209
17. Eylon · Metall. Trans. A · 1985 · 16 · 152610.1007/BF02658686 ↗
18. Gerling · Mater. Sci. Eng.A · 1998 · 252 · 23910.1016/S0921-5093(98)00656-X ↗
19. N.J. Petch, J. Iron Steel Inst. 174(1) (1953), 25–28.10.1111/j.1600-0447.1952.tb10992.x ↗
20. Gerling · 1995 · 3 · 91
21. Koeppe · Metall. Trans. A · 1993 · 24 · 179510.1007/BF02657854 ↗
22. Huang · 1991 · 105
23. Vasudevan · Scr. Metall. · 1989 · 23 · 46710.1016/0036-9748(89)90434-1 ↗
24. Morris · Mater. Sci. Eng. A · 1997 · 224 · 110.1016/S0921-5093(96)10532-3 ↗
25. Bohn · Mater. Sci. Forum · 1999 · 312–314 · 57510.4028/www.scientific.net/MSF.312-314.575 ↗
26. G. Wegmann, Doctoral Thesis 1997, TU Hamburg-Harburg, p. 41.
27. Imayev · Scr. Metall. Mater. · 1993 · 29 · 71310.1016/0956-716X(93)90424-Q ↗