Enhancements of the simulation method on the edge effect in resin transfer molding processes
Source abstract
Abstract
Abstract In resin transfer molding processes, small clearances exist between the fiber preform and the mold edges, which result in a preferential resin flow in the edge channel and then disrupt the flow patterns during the mold filling stage. A mathematical model including the effect of cavity thickness on resin flow was developed for flow behavior involving the interface between an edge channel and a porous medium. According to the mathematical analysis of momentum equations in a fully developed rectangular duct and formulations of the equivalent edge permeability, comparing with three-dimensional Navier–Stokes equations, the governing equations were modified in the edge channel. The volume of fluid (VOF) method was applied to track the flow front. A simple case is numerically simulated using the modified governing equations. The effects of edge channel width and cavity thickness on flow front and inlet pressure are analyzed, and the evolution characteristics of simulated results are in agreement with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Rheology and Fluid Dynamics Studies · Lattice Boltzmann Simulation Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Bruschke · Polym. Compos. · 1990 · 11 · 39810.1002/pc.750110613 ↗
2. Young · Polym. Compos. · 1991 · 12 · 39110.1002/pc.750120604 ↗
3. Chan · Polym. Eng. Sci. · 1991 · 31 · 114910.1002/pen.760311512 ↗
4. Um · 1990 · 1905
5. Gauvin · Plast. Rubb. Comp. Proc. Appl. · 1993 · 19 · 151
6. Mohan · Numer. Heat Transfer Part A · 1999 · 35 · 81510.1080/104077899274921 ↗
7. Wang · Polym. Compos. · 1994 · 15 · 27810.1002/pc.750150406 ↗
8. Gupte · Exp. Fluids · 1997 · 22 · 40810.1007/s003480050067 ↗
9. Gupte · Polym. Compos. · 1997 · 18 · 11410.1002/pc.10266 ↗
10. Wu · J. Reinf. Plast. Compos. · 1995 · 14 · 69410.1177/073168449501400703 ↗
11. Hammami · Appl. Compos. Mater. · 1998 · 5 · 16110.1023/A:1008887400832 ↗
12. Hammami · Composites Part A · 1998 · 29 · 60310.1016/S1359-835X(97)00120-6 ↗
13. Ni · Polym. Compos. · 1997 · 18 · 25410.1002/pc.10280 ↗
14. Beavers · J. Fluid Mech. · 1967 · 30 · 19710.1017/S0022112067001375 ↗
15. Young · Composites Part A · 1997 · 28 · 81710.1016/S1359-835X(97)00034-1 ↗
16. Bickerton · Compos. Sci. Technol. · 1999 · 59 · 221510.1016/S0266-3538(99)00077-9 ↗
17. Bickerton · 1995
18. Costa · Comput. Struct. · 2004 · 82 · 153510.1016/j.compstruc.2004.03.049 ↗
19. Costa · Numer. Heat Transfer Part A · 2004 · 45 · 67510.1080/10407780490424839 ↗
20. Goyeau · Int. J. Heat Mass Transfer · 2003 · 46 · 407110.1016/S0017-9310(03)00241-2 ↗
21. Hétu · Polym. Eng. Sci. · 1998 · 38 · 22310.1002/pen.10183 ↗
22. Chang · Int. J. Numer. Methods Fluids · 2001 · 37 · 12510.1002/fld.166 ↗
23. Versteeg · 2000
24. Gueyffier · J. Comput. Phys. · 1999 · 152 · 42310.1006/jcph.1998.6168 ↗
25. Yang · Mater. Sci. Eng. A · 2006 · 435–436 · 51510.1016/j.msea.2006.07.110 ↗
26. White · 1974