journal article·2009-05

An experimental and numerical investigation on damping capacity of nanocomposite

M. Yadollahpour, J. Kadkhodapour, S. Ziaei-Rad, F. Karimzadeh

Materials Science and Engineering: A· Volume 507· Issue 1-2
Publisher page

Abstract

Abstract In the present study, the damping capacity of a metal–matrix nanocomposite is predicted using a micro-mechanical modeling approach. The model is based on finite element analysis of a unit cell, which mimics a pure metallic lattice with stiff reinforcing nanoparticles. The dissipated energy of nanocomposite is predicted numerically by applying a harmonic load on the unit cell model. The model was then validated by comparing the numerical results against an impact based suspended cylinder experiment conducted at low strain amplitude on Al–Zn/α-Al 2 O 3 of nanocomposite. Good agreement was observed between the predicted and experimental values. Finally, a parametric study was carried out to calculate the effects of different parameters such as reinforcement volume fraction and grain size on the damping characteristics of nanocomposite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · High-Velocity Impact and Material Behavior · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Asare · 2004
2. Schaller · J. Alloys Compd. · 2003 · 355 · 13110.1016/S0925-8388(03)00239-1 ↗
3. Sastry · J. Alloys Compd. · 2001 · 314 · 26810.1016/S0925-8388(00)01235-4 ↗
4. Sanders · Acta Mater. · 1997 · 45 · 401910.1016/S1359-6454(97)00092-X ↗
5. Cai · Scripta Mater. · 2001 · 44 · 104310.1016/S1359-6462(00)00705-3 ↗
6. Wang · Metall. Mater. Trans. A · 2003 · 34A · 138710.1007/s11661-003-0250-6 ↗
7. Gu · Mater. Lett. · 2004 · 58 · 195210.1016/j.matlet.2003.11.036 ↗
8. Trojanová · Mater. Sci. Eng. A · 2004 · 370 · 15410.1016/j.msea.2002.12.011 ↗
9. Liu · Mater. Sci. Eng. A · 2006 · 442 · 30710.1016/j.msea.2006.01.146 ↗
10. Patel · Mech. Res. Commun. · 2008 · 35 · 11510.1016/j.mechrescom.2007.08.005 ↗
11. Xu · Comput. Mater. Sci. · 1999 · 15 · 9610.1016/S0927-0256(99)00012-9 ↗
12. Wang · Comput. Mater. Sci. · 2001 · 21 · 910.1016/S0927-0256(00)00212-3 ↗
13. Wang · Mater. Sci. Eng. · 2001 · A303 · 7710.1016/S0921-5107(01)00708-5 ↗
14. Gu · J. Alloys Compd. · 2004 · 381 · 18210.1016/j.jallcom.2004.03.100 ↗
15. Yamakov · Acta Mater. · 2002 · 6110.1016/S1359-6454(01)00329-9 ↗
16. Wei · J. Mech. Phys. Sol. · 2004 · 52 · 258710.1016/j.jmps.2004.04.006 ↗
17. Meyers · Defects Mech. Prop. · 1982 · 46 · 737
18. Kim · Acta Mater. · 2000 · 48 · 49310.1016/S1359-6454(99)00353-5 ↗
19. Kim · J. Mater. Process. Technol. · 2001 · 112 · 10910.1016/S0924-0136(01)00565-9 ↗
20. Carsley · Nanostruct. Mater. · 1995 · 5 · 44110.1016/0965-9773(95)00257-F ↗
21. Schwaiger · Acta Mater. · 2003 · 515910.1016/S1359-6454(03)00365-3 ↗
22. Tavoosi · Mater. Lett. · 2008 · 62 · 28210.1016/j.matlet.2007.05.017 ↗
23. M. Tavoosi, F. Karimzadeh, M.H. Enayati, A. Heidarpour, J. Alloys Compd., in press, (2008), doi:10.1016/j.jallcom.2008.07.049.10.1016/j.jallcom.2008.07.049 ↗
24. Ewins · 2001
25. Handbook on Modal Testing. Dynamic Testing Agency (DTA), 1993.
26. Primer on Best Practice in Dynamic Testing, Dynamic Testing Agency (DTA), 2000.
27. ICATS Manual, Imperial College Analysis and Testing Software, June 2003.
28. M. Imregun, D.J. Ewins, 13th IMAC, Nashville, Tennessee, (1995), pp. 496–506.