journal article·2013-01

Finite element method-assisted acquisition of the matrix influence on the indentation results of an embedded hard phase

F. Pöhl, S. Huth, W. Theisen

Publisher page

Abstract

Abstract FE-simulations were performed in order to quantify the matrix influence on the load–displacement curve and thus on the apparent hardness and Young's modulus of an embedded hard phase. The model system investigated in this study is the cold work tool steel X210Cr12 with an embedded spherical M7C3 carbide. In order to investigate the matrix influence on the indentation results, two different heat-treatment conditions were distinguished (soft-annealed and quenched+tempered). For each material combination, as well as several hard phase diameters, load–displacement curves and mechanical properties were calculated (via traditional Oliver and Pharr method) [1] . For low hard phase sizes or deep indentation depths, the surrounding matrix undergoes plastic deformation as the hard phase is pushed into it. This push-in event leads to significant errors in the calculated material parameters. A critical maximum indentation depth was determined depending on the hard phase diameter. It is shown that the ratio of indentation depth and hard phase diameter is the quantity of importance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Oliver · J. Mater. Res. · 1992 · 7 · 156410.1557/JMR.1992.1564 ↗
2. Chollacoop · Mater. Sci. Eng. A · 2006 · 423
3. Antunes · Int. J. Solids Struct. · 2007 · 44 · 831310.1016/j.ijsolstr.2007.06.015 ↗
4. Gamonpilas · Mater. Sci. Eng. A · 2004 · 380 · 5210.1016/j.msea.2004.04.038 ↗
5. Sun · Thin Solid Films · 1995 · 258 · 19810.1016/0040-6090(94)06357-5 ↗
6. Richter · Surf. Coatings Technol. · 2006 · 201 · 357710.1016/j.surfcoat.2006.08.124 ↗
7. Chechenin · Thin Solid Films · 1997 · 304 · 7010.1016/S0040-6090(96)09600-9 ↗
8. Cleymand · Surf. Coatings Technol. · 2005 · 200 · 89010.1016/j.surfcoat.2005.02.086 ↗
9. Tricoteaux · Mech. Mater. · 2010 · 41 · 16610.1016/j.mechmat.2009.11.016 ↗
10. Yoo · Surf. Coatings Technol. · 2004 · 179 · 32410.1016/S0257-8972(03)00814-4 ↗
11. Liao · Mech. Mater. · 2009 · 30810.1016/j.mechmat.2008.10.008 ↗
12. Persch · Microelectron. Eng. · 1994 · 24 · 11310.1016/0167-9317(94)90061-2 ↗
13. Chudoba · Surf. Coatings Technol. · 2002 · 154 · 14010.1016/S0257-8972(02)00016-6 ↗
14. Bolshakov · J. Mater. Res. · 1998 · 13 · 104910.1557/JMR.1998.0146 ↗
15. Garrido · Key Eng. Mater. · 2007 · 345–346 · 80510.4028/www.scientific.net/KEM.345-346.805 ↗
16. Zhou · Mater. Sci. Eng. A · 2008 · 488 · 31810.1016/j.msea.2008.01.020 ↗
17. ABAQUS, User's Manual v. 6.9, ABAQUS Inc., Providence, USA, 2009.
18. Johnson · J. Mech. Phys. Solids · 1970 · 11510.1016/0022-5096(70)90029-3 ↗
19. Johnson · Wear · 1995 · 16210.1016/0043-1648(95)06665-9 ↗
20. Larsson · Philos. Mag. · 2006 · 515510.1080/14786430600589089 ↗
21. Kopernik · Mater. Sci. Technol. · 2008 · 24 · 36910.1179/174328408X278510 ↗
22. Panich · J. Res. Sci. · 2004 · 145
23. Bressan · Wear · 2005 · 11510.1016/j.wear.2004.05.021 ↗
24. Bucaille · Acta Mater. · 2003 · 51 · 166310.1016/S1359-6454(02)00568-2 ↗
25. Mata · J. Mech. Phys. Solids · 2004 · 14510.1016/S0022-5096(03)00075-9 ↗
26. Broeckmann · 1995
27. Friedrich · Z. Materialwissenschaft Werkstofftech. · 1997 · 28 · 5910.1002/mawe.19970280206 ↗
28. DIN EN ISO 14577, Instrumentierte Eindringprüfung zur Bestimmung der Härte und anderer Werkstoffparameter, 2007.