journal article·2005-04

Influence of heating rate in α + γ dual phase field on lamellar morphology and creep property of fully lamellar Ti–48Al alloy

Hanliang Zhu, J. Matsuda, K. Maruyama

Materials Science and Engineering: A· Volume 397· Issue 1-2
Publisher page

Abstract

Abstract The fully lamellar structure of a Ti–48Al alloy was subjected to secondary annealing heat treatments with controlled heating rates in the α + γ dual phase field to produce various lamellar structures. The effects of heating rate on the microstructure and creep property were investigated. It was found that the α 2 lamellar spacing, length and thickness decrease with increasing heating rate. The decrease of α 2 lamellar spacing is most effective at lower heating rate, and minimum creep rate decreases with increasing heating rate, since a high density of γ/α 2 boundaries stabilizes the lamellar microstructure. Secondary γ precipitation in thick α 2 laths may also contribute to the decrease of the minimum creep rate at the lower heating rate. On the other hand, creep rate increases at high heating rate since α 2 laths become discontinuous with increasing heating rate. A reduction of creep rate by one order of magnitude was achieved at the optimum heating rate providing the best combination of narrow spacing and sufficiently long length of α 2 lamellae.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Kim · Acta Mater. · 2003 · 51 · 219110.1016/S1359-6454(03)00012-0 ↗
2. Beddoes · Int. Mater. Rev. · 1995 · 40 · 19710.1179/imr.1995.40.5.197 ↗
3. Maruyama · Mater. Sci. Eng. · 1997 · A239–240 · 41910.1016/S0921-5093(97)00612-6 ↗
4. Ramanujan · Acta Mater. · 1994 · 42 · 231310.1016/0956-7151(94)90310-7 ↗
5. Appel · Mater. Sci. Eng. · 1998 · R22 · 18710.1016/S0927-796X(97)00018-1 ↗
6. Maruyama · Mater. Sci. Eng. · 2004 · A387–389 · 91010.1016/j.msea.2004.01.124 ↗
7. Ramanujan · Int. Mater. Rev. · 2000 · 45 · 21710.1179/095066000101528377 ↗
8. Seo · Mater. Sci. Eng. · 2002 · A329–331 · 13010.1016/S0921-5093(01)01546-5 ↗
9. Beschliesser · Mater. Sci. Eng. · 2001 · A329–331 · 124
10. Tang · Mater. Res. Bull. · 2001 · 36 · 173710.1016/S0025-5408(01)00650-X ↗
11. Takeyama · 1993 · 167
12. Jones · Acta Met. Mater. · 1993 · 41 · 38710.1016/0956-7151(93)90069-5 ↗
13. Hu · Intermetallics · 1998 · 6 · 41310.1016/S0966-9795(98)80019-8 ↗
14. Zhu · Scripta Mater. · 2005 · 52 · 4510.1016/j.scriptamat.2004.08.027 ↗
15. Takeyama · Mater. Sci. Eng. · 1992 · A152 · 26910.1016/0921-5093(92)90078-F ↗
16. Zhang · Acta Met. Mater. · 1994 · 42 · 203510.1016/0956-7151(94)90028-0 ↗
17. Malinov · Mater. Sci. Eng. · 2004 · A386 · 34410.1016/S0921-5093(04)00985-2 ↗
18. Ohnuma · Acta Mater. · 2000 · 48 · 311310.1016/S1359-6454(00)00118-X ↗
19. Chaudhury · Mater. Sci. Eng. · 1992 · A152 · 3710.1016/0921-5093(92)90043-Z ↗
20. Kim · Met. Mater. Int. · 2003 · 9 · 25510.1007/BF03027044 ↗
21. Zhang · Intermetallics · 2003 · 11 · 17710.1016/S0966-9795(02)00226-1 ↗
22. Wegmann · Phil. Mag. · 2000 · A80 · 228310.1080/01418610008216473 ↗