journal article·2008-05

The effect of sintering additive on fracture behavior of carbon-whisker-reinforced silicon carbide composites

Yumin Zhang, Yunlong Zhang, Jiecai Han, Luyang Hu

Materials Science and Engineering: A· Volume 480· Issue 1-2
Publisher page

Abstract

Abstract Hot-pressed silicon carbide composites reinforced with carbon fiber were prepared. Aluminum and yttrium oxides served as sintering additives and low-cost α phase SiC was used as starting powder, instead of the more expensive β-SiC. In the sintering process, the SiC-matrix grains grew larger via solution reprecipitation. Reaction of Al 2 O 3 /Y 2 O 3 additives with SiO 2 on the surface of SiC or its oxidation products caused formation and distribution of a low-eutectic-point phase around the SiC grains and carbon whiskers. Such amorphous films can be found in triple-junctions and boundaries of SiC grains. Excess sintering additives improve the room-temperature flexural strength, but reduce the fracture toughness. Coupled with a higher sintering temperature, they contribute to the diffusion of yttrium ions into carbon fiber, and make the reaction layer thicker. Non-homogeneous amorphous inclusions between grains and whiskers are harmful for mechanical properties. A combination of grain bridging, crack deflection and whisker debonding can improve fracture toughness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Lin · J. Am. Ceram. Soc. · 1986 · 69 · C6710.1111/j.1151-2916.1986.tb04753.x ↗
2. Padture · J. Am. Ceram. Soc. · 1994 · 77 · 51910.1111/j.1151-2916.1994.tb07024.x ↗
3. Mitchell · J. Am. Ceram. Soc. · 1995 · 78 · 9710.1111/j.1151-2916.1995.tb08366.x ↗
4. Cao · J. Am. Ceram. Soc. · 1996 · 79 · 46110.1111/j.1151-2916.1996.tb08145.x ↗
5. Lee · J. Am. Ceram. Soc. · 1994 · 77 · 165510.1111/j.1151-2916.1994.tb09771.x ↗
6. Kim · J. Am. Ceram. Soc. · 1998 · 81 · 313610.1111/j.1151-2916.1998.tb02748.x ↗
7. Lee · Ceram. Int. · 1998 · 24 · 48910.1016/S0272-8842(97)00047-3 ↗
8. Kim · J. Am. Ceram. Soc. · 1999 · 82 · 44110.1111/j.1551-2916.1999.tb20082.x ↗
9. Ortiz · J. Am. Ceram. Soc. · 2000 · 83 · 228310.1111/j.1151-2916.2000.tb01548.x ↗
10. Xu · J. Am. Ceram. Soc. · 2001 · 84 · 157810.1111/j.1151-2916.2001.tb00880.x ↗
11. Deshpande · J. Am. Ceram. Soc. · 2001 · 84 · 158510.1111/j.1151-2916.2001.tb00881.x ↗
12. Tsuda · Ceram. Soc. Jpn. · 1992 · 100 · 53010.2109/jcersj.100.530 ↗
13. Kochendorfer · Key Eng. Mater. · 1999 · 1 · 164
14. Krenkel · Adv. Eng. Mater. · 2002 · 4 · 42710.1002/1527-2648(20020717)4:7<427::AID-ADEM427>3.0.CO;2-C ↗
15. Kim · J. Am. Ceram. Soc. · 1997 · 80 · 9910.1111/j.1151-2916.1997.tb02796.x ↗
16. Padture · J. Am. Ceram. Soc. · 1994 · 77 · 251810.1111/j.1151-2916.1994.tb04637.x ↗
17. Kim · J. Am. Ceram. Soc. · 1995 · 78 · 314510.1111/j.1151-2916.1995.tb09100.x ↗
18. Mulla · Acta Metall. Mater. · 1994 · 42 · 30310.1016/0956-7151(94)90072-8 ↗
19. Borom · J. Am. Ceram. Soc. · 1987 · 70 · 110.1111/j.1151-2916.1987.tb04844.x ↗
20. Marshall · J. Am. Ceram. Soc. · 1985 · 65 · 22510.1111/j.1151-2916.1985.tb15313.x ↗
21. Zhang · J. Am. Ceram. Soc. · 2000 · 83 · 281310.1111/j.1151-2916.2000.tb01637.x ↗