journal article·2002-08

Investigation of passivity and its breakdown on Fe3AlCrMo intermetallics in thiosulfate–chloride solution

Yoon-Seok Choi, Jung-Gu Kim

Materials Science and Engineering: A· Volume 333· Issue 1-2
Publisher page

Abstract

Abstract Aqueous corrosion characteristics of iron aluminides in thiosulfate–chloride solution were studied as a function of Mo addition. Four kinds of iron aluminides, namely, FA-72(Fe–28Al–4Cr), FA-138(Fe–28Al–4Cr–0.5Mo), FA-139(Fe–28Al–4Cr–1Mo) and FA-140(Fe–28Al–4Cr–2Mo), were prepared by arc-melting followed by thermomechanical treatment. An aerated thiosulfate–chloride solution was used to simulate a sulfur-bearing environment. The corrosion behavior in thiosulfate–chloride solution for the prepared alloys was investigated by electrochemical corrosion tests (cyclic polarization test, potentiostatic test and electrochemical impedance spectroscopy (EIS) measurement) and surface analysis (SEM and AES). The results of the cyclic polarization test indicated that the breakdown potential and the protection potential increased with increasing Mo content. EIS measurements showed that the semicircle was less depressed when the Mo content increased. Furthermore, the Mo-bearing alloys present higher R ct values than a Mo-free alloy at breakdown, repassivation and passivation states. The SEM observations of surface morphology after corrosion tests showed that the iron aluminides containing Cr and Mo had far fewer pits than those containing only Cr. The AES results gave evidence that the thiosulfate ions are reduced on the metallic surface, which inhibits the repassivation process. However, by enhancing the Al and Cr in oxides, Mo additions aid in the development and stability of a repassivating layer which further provided resistance against Cl − and S 2 O 3 2− ions attack.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Mckamey · Mater. Sci. Eng. · 1992 · A153 · 573
2. Mckamey · J. Mater. Res. · 1991 · 6 · 177910.1557/JMR.1991.1779 ↗
3. Mckamey · J. Mater. Res. · 1989 · 4 · 115610.1557/JMR.1989.1156 ↗
4. Mckamey · Scripta Metall. Mater. · 1990 · 24 · 211910.1016/0956-716X(90)90496-4 ↗
5. Morris · Acta Metall. Mater. · 1993 · 41 · 9710.1016/0956-7151(93)90342-P ↗
6. Stoloff · Mater. Sci. Eng. · 1998 · A258 · 110.1016/S0921-5093(98)00909-5 ↗
7. Gutzeit · 1987 · 171
8. Roberge · Corrosion · 1988 · 44 · 27410.5006/1.3583937 ↗
9. Newman · Corrosion · 1985 · 41 · 45010.5006/1.3583826 ↗
10. Kim · Corrosion · 1994 · 50 · 65810.5006/1.3293541 ↗
11. Choe · J. Mater. Sci. · 1997 · 32 · 122110.1023/A:1018588019288 ↗
12. Newman · Corrosion · 1989 · 45 · 28210.5006/1.3577855 ↗
13. B. Kursten, F. Druyts, CORROSION/2000, paper no. 201. NACE, Houston, TX, 1985.
14. Garner · Corrosion · 1985 · 41 · 58710.5006/1.3582988 ↗
15. Park · Electrochim. Acta · 1997 · 42 · 328110.1016/S0013-4686(97)00179-5 ↗
16. Cabot · Electrochim. Acta · 1995 · 40 · 44710.1016/0013-4686(94)00299-G ↗
17. Souto · Corrosion Sci. · 2000 · 42 · 220110.1016/S0010-938X(00)00057-3 ↗
18. Clayton · J. Electrochem. Soc. · 1986 · 133 · 246510.1149/1.2108451 ↗
19. Brooks · J. Electrochem. Soc. · 1986 · 133 · 245910.1149/1.2108450 ↗