Processing of continuous-ceramic-fiber-reinforced intermetallic composites by pressure casting
Source abstract
Abstract
Pressure casting because of its flexibility and greater promise for economy compared with other composite-processing routes is being extensively used to fabricate low temperature composites. A pressure-casting apparatus has been developed which allowed, for the first time, the fabrication of fiber-reinforced high temperature composite materials. A series of Ni3Al, TiAl and Fe3Al composites, unidirectionally reinforced with either DuPont's fiber FP (Al2O3) or PRD-166 (Al2O320wt.%ZrO2) continuous fibers which were 20 μm in diameter, have been produced. Optical and transmission electron microscopy have been employed to characterize the microstructure. In the case of nickel and iron aluminides it was found necessary to add a small amount (0.5–1 at.%) of a strong oxide former such as titanium, yttrium or zirconium to improve wetting and therefore to achieve complete infiltration. This paper will focus on the fiber-matrix bonding, and the nature and the extent of fiber-matrix reaction in these composites. Mechanical testing indicated that reinforcing Ni3Al with PRD-166 fibers resulted in a twofold increase in specific modulus and a fivefold increase in strength.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Intermetallic and ceramic matrix composites for 815 to 1370°C gas turbine applications
2. Composites boost 21st-century aircraft engines
3. Fabrication of high temperature fiber reinforced intermetallic matrix composites
4. Solidification processing of metal-matrix composites
5. An apparatus for pressure casting of fibre-reinforced high-temperature metal-matrix composites10.1088/0022-3735/21/9/017 ↗
6. Calculation of minimum pressure for liquid metal infiltration of a fiber array10.1007/BF02663216 ↗
7. Characterization of a zirconia toughened alumina fiber, PRD-16610.1007/BF00721482 ↗
8. Microstructural observations of pressure cast Ni3Al/Al2O3 and Ni/Al2O3 composites10.1007/BF02650301 ↗
9. Fabrication of Ni3Al/Al2O3 and Ni/Al2O3 composites by pressure casting, effect of yttrium
10. Metallurgical Thermochemistry
11. Massalski · 1986 · Vol. 2 · 1800
12. Interfaces in nickel aluminide/alumina fibre composites10.1007/BF01106818 ↗
13. Williams · 1985 · Vol. 39 · 505
14. New high-temperature ceramic fiber10.1002/9780470320402.ch31 ↗
15. Pressure casting of Ni3Al/Al2O3 composites
16. Microstructure of a pressure cast Fe3Al intermetallic alloy composite reinforced with zirconia toughened alumina fibers10.1007/BF02647208 ↗
17. Clarck · 1984 · 189
18. T. Tsujimoto and K. Hashimoto, in C. T. Liu, A. I. Taub, N. S. Stoloff and C. C. Koch (eds.), High-temperature Ordered Intermetallic Alloys III, Materials Research Society Symp. Proc. Vol. 13, Materials Research Society, Pittsburgh, PA, pp. 391–396
19. Interaction of Al2O3ZrO2 fibers with a TiAl matrix during pressure casting10.1007/BF02656438 ↗