Microstructure, mechanical properties and chemical degradation of brazed AISI 316 stainless steel/alumina systems
Source abstract
Abstract
Abstract The main aims of the present study are simultaneously to relate the brazing parameters with: (i) the correspondent interfacial microstructure, (ii) the resultant mechanical properties and (iii) the electrochemical degradation behaviour of AISI 316 stainless steel/alumina brazed joints. Filler metals on such as Ag–26.5Cu–3Ti and Ag–34.5Cu–1.5Ti were used to produce the joints. Three different brazing temperatures (850, 900 and 950 °C), keeping a constant holding time of 20 min, were tested. The objective was to understand the influence of the brazing temperature on the final microstructure and properties of the joints. The mechanical properties of the metal/ceramic (M/C) joints were assessed from bond strength tests carried out using a shear solicitation loading scheme. The fracture surfaces were studied both morphologically and structurally using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction analysis (XRD). The degradation behaviour of the M/C joints was assessed by means of electrochemical techniques. It was found that using a Ag–26.5Cu–3Ti brazing alloy and a brazing temperature of 850 °C, produces the best results in terms of bond strength, 234 ± 18 MPa. The mechanical properties obtained could be explained on the basis of the different compounds identified on the fracture surfaces by XRD. On the other hand, the use of the Ag–34.5Cu–1.5Ti brazing alloy and a brazing temperature of 850 °C produces the best results in terms of corrosion rates (lower corrosion current density), 0.76 ± 0.21 μA cm −2 . Nevertheless, the joints produced at 850 °C using a Ag–26.5Cu–3Ti brazing alloy present the best compromise between mechanical properties and degradation behaviour, 234 ± 18 MPa and 1.26 ± 0.58 μA cm −2 , respectively. The role of Ti diffusion is fundamental in terms of the final value achieved for the M/C bond strength. On the contrary, the Ag and Cu distribution along the brazed interface seem to play the most relevant role in the metal/ceramic joints electrochemical performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Advanced ceramic materials synthesis · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Schwartz · 1990 · 75
2. Nicholas · Br. Ceram. Trans. J. · 1986 · 85 · 144
3. Loehamn · Acta Metall. Mater. · 1992 · 40 · S7510.1016/0956-7151(92)90266-H ↗
4. Hao · J. Mater. Sci. · 1995 · 30 · 410710.1007/BF00360716 ↗
5. Hao · J. Mater. Sci. · 1995 · 30 · 123310.1007/BF00360716 ↗
6. Rongti · Mater. Sci. Eng. A · 2002 · 335 · 2110.1016/S0921-5093(01)01903-7 ↗
7. Paiva · J. Mater. Sci. · 1997 · 32 · 65310.1023/A:1018531617529 ↗
8. Paiva · 1995 · 275
9. Paiva · J. Mater. Sci. · 2000 · 35 · 116510.1023/A:1004776117823 ↗
10. Rocha · J. Mater Sci.: Mat. Med. · 1985 · 6 · 83510.1007/BF00134327 ↗
11. Paiva · 1998 · vol. 53 · 329
12. Ariza · 2004
13. Idrissi · Materiaux et Techniques · 1987 · 43310.1051/mattech/198775100433 ↗
14. Idrissi · J. Mater. Sci. · 1994 · 29 · 532710.1007/BF01171543 ↗
15. Niu · Oxidat. Met. · 1997 · 47 · 2110.1007/BF01682370 ↗
16. Stern · Corrosion · 1957 · 13 · 13910.5006/0010-9312-13.11.97 ↗
17. Saiz · Acta Mater. · 2000 · 48 · 444910.1016/S1359-6454(00)00231-7 ↗
18. Kang · Ceram. Bull. · 1989 · 68 · 1608
19. Elssner · ISIJ Int. · 1990 · 30 · 101110.2355/isijinternational.30.1011 ↗
20. Kim · J. Mater. Sci. · 1991 · 26 · 322310.1007/BF01124666 ↗
21. Meier · JOM · 1999 · 4410.1007/s11837-999-0209-1 ↗
22. Zhai · J. Mater. Sci. · 1997 · 32 · 139910.1023/A:1018581312445 ↗
23. W. Weise, W. Malikowski, W. Bohm, Degussa AG, Hanau, Germany, Internal Report (1995).
24. Moret · Journal de Physique IV, Colloque · 1993 · C7 · 1043
25. Gibbesch · Biomaterials · 1992 · 13 · 45510.1016/0142-9612(92)90166-L ↗
26. 1992
27. Lee · J. Mater. Sci. · 1995 · 30 · 167910.1007/BF00351596 ↗
28. Shreir · 1978 · vol. 1 · 3:31
29. A.D. Bernache, in: M.A. Barbosa et al. (Ed.), Biomaterials Degradation. Fundamental aspects and related clinical phenomena, Elsevier, Amsterdam, E-MRS Monographs I, 1991, 111-167.
30. Sequeira · Br. Corros. J. · 1995 · 30 · 13710.1179/bcj.1995.30.2.137 ↗
31. LaQue · 1975 · 179
32. Paiva · 1998 · 699
33. Paiva · 1999 · 95
34. Walkiden · 1978 · vol. 1 · 6:1
35. Janssens · Prev. Vet. Med. · 1996 · 25 · 24910.1016/0167-5877(95)00495-5 ↗
36. Tsalev · 1983