Experimental and numerical simulation of a stainless steel coating subjected to thermal fatigue
Source abstract
Abstract
Abstract Continuous casting rollers are subjected to thermal cyclic loading termed thermal fatigue. This study presents a 3-D, experimental and numerical, simulation of the thermal loads and of the associated stresses. The results are validated by thermal loading a cylinder with dimensions of one fifth of the real cylinder. Coatings of different chemical composition and thickness are deposited on the cylinder’s outer surface for protection. Temperature distributions are measured to determine the thermal history of the cylinder from the initial state up to the stabilization of the cycle. The temperature range is established to correspond to typical industrial values. A numerical simulation is carried out to evaluate strain and stress levels induced by thermal loading using the finite element method. In order to numerically estimate thermal loading with the highest accuracy, an inverse method is used. The parameters of thermal laws are identified by minimizing the difference between the measured data and the numerical forecast of the model. After this optimization process, the mechanical system is modeled applying the optimized thermal loading. The laws of elastoviscoplastic behavior are applied with their constitutive parameters adapted to the working temperature range of the cylinder. This modeling constitutes a technological means of selecting the nature of the coating material and its optimal thickness by testing different thermal loadings in order to optimize the industrial process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. D.A. Spera, Thermal fatigue of materials and components, in: D.A. Spera, D.F. Mowbray (Eds.), ASTM, STP 612, 1976, pp. 3–9.10.1520/STP612-EB ↗
2. R.H. King, A.I. Smith, Thermal and high-strain fatigue, The Institute of Metals and the Iron and Steel Institute, London, 1967, pp. 364–378.
3. E. Glenny, Thermal and high-strain fatigue, The Institute of Metals and the Iron and Steel Institute, London, 1967, pp. 346–363.
4. Rézai-Aria · Fatigue Fract. Eng. Mater. Struct. · 1988 · 11 · 27710.1111/j.1460-2695.1988.tb01181.x ↗
5. Woodford · Mater. Sci. Eng. · 1974 · 16 · 510.1016/0025-5416(74)90135-9 ↗
6. L. Remy, Int. Spring Meeting (SFM), Paris, Juin 1986, pp. 252–274.
7. Jean · Mater. Technol. · 1999 · 1-2 · 2310.1051/mattech/199987010023 ↗
8. Lee · Metall. Mater. Trans. · 1997 · 28A · 259510.1007/s11661-997-0017-6 ↗
9. Stainless Steels
10. J.L. Chaboche, in: C. Bathias, J.P. Bailon (Eds.), La fatigue des matériaux et des structures, PUM les Presses de l’Université de Montreal, Paris, 1980, pp. 523–545.
11. Necib · Mater. Sci. Eng. · 1997 · A237 · 12610.1016/S0921-5093(97)00111-1 ↗
12. Tseng · Num. Heat Transfer · 1984 · 7 · 113
13. M. Renaud, Rapport interne CIREP, Sollac, Florange, 1986.
14. P. Revel, K. Necib, G. Beranger, H. Michaud, La Revue de Métallurgie-CIT/SGM 5, 1998, pp. 679–690.10.1051/metal/199895050679 ↗
15. Fletcher · 1989 · 97
16. Lemaitre · 1985 · 311
17. Chaboche · Int. J. Plast. · 1989 · 5 · 24710.1016/0749-6419(89)90015-6 ↗
18. Burlet · Eng. Comput. · 1986 · 3 · 14310.1108/eb023652 ↗
19. Eyglument · 1994
20. Cailletaud · Am. Soc. Mech. Eng. · 1993 · 43 · 33
21. P. Pilvin, in: Proceedings of MECAMAT, Besançon, France, 1988, pp.155–164.
22. Imber · AIAA J. · 1975 · 13 · 11410.2514/3.49645 ↗
23. Beck · Int. J. Heat Mass Transf. · 1970 · 13 · 70310.1016/0017-9310(70)90044-X ↗
24. V. Bogard, P. Revel, La Revue de Métallurgie-CIT/SGM 2, 1999, pp. 227–236.10.1051/metal/199996020227 ↗
25. Revel · Mater. Sci. Eng. · 1993 · A169 · 8510.1016/0921-5093(93)90601-A ↗