Origin of the depth dependence of the apparent activation volume in polycrystalline 99.999% Cu determined by displacement rate change micro-indentation
Source abstract
Abstract
Abstract Micro-indentation with displacement rate changes were performed at 300 K on high purity polycrystalline copper rods in the as-swaged and fully recrystallized condition to evaluate the influence of indentation depth on the apparent activation volume, V ′, and the indentation hardness, H . Both H and V ′, initially increase with indented inelastic depth and then approach plateau-values with H being higher and V ′ being lower for the swaged compared to the annealed copper. The average inter-obstacle spacing, l ∗ , characteristic of the annealed copper, was estimated to be 2800 b , which corresponds to an average activation distance, d ∗ , of 0.49 b . For the swaged copper, l ∗ was estimated to be 490 b for the same d ∗ . The variation in H and V ′ with indentation depth indicates that the dislocation density, and hence the average plastic strain, around the indentations, increases as the plastic zone size decreases. H and V ′ at various indentation depths were used to construct part of the dislocation-obstacle force versus distance diagram for copper.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and mechanical properties · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Kocks · Prog. Mater. Sci · 1975 · 19 · 110.1016/0079-6425(75)90005-5 ↗
2. Basinski · Philos. Mag · 1959 · 4 · 39310.1080/14786435908233412 ↗
3. Tanoue · Acta Metall. Mater · 1992 · 40 · 194510.1016/0956-7151(92)90180-M ↗
4. W.R. Newson, B.J. Diak, S. Saimoto, in: W.W. Gerberich, H. Gao, J.-E. Sundgren, S.P. Baker (Eds.), Thin Films: Stresses and Mechanical Properties VI, vol. 436, MRS Publications, Warrendale, PA, USA, 1997, pp. 359–364.
5. Saimoto · Mater. Sci. Eng. A · 1997 · 234–236 · 101510.1016/S0921-5093(97)00317-1 ↗
6. Diak · Mater. Sci. Eng. A · 2001 · 319–321 · 90910.1016/S0921-5093(01)01093-0 ↗
7. Poole · Scripta Mater · 1996 · 34 · 55910.1016/1359-6462(95)00524-2 ↗
8. F.R.N. Nabarro, Theory of Crystal Dislocations, Dover Publications Inc., New York, USA, 1987, p. 85.
9. H.J. Frost, M.F. Ashby, Deformation-Mechanism Maps, Pergamon Press, Oxford, UK, 1982, pp. 6–8.
10. S. Saimoto, Ph.D. Dissertation, M.I.T., 1964.
11. Ashby · Philos. Mag · 1970 · 21 · 39910.1080/14786437008238426 ↗
12. P.M. Sargent, in: P.J. Blau, B.R. Lawn (Eds.), Microindentation Techniques in Materials Science and Engineering, ASTM STP 889, Philadelphia, PA, USA, 1985, pp. 160–174.10.1520/STP32956S ↗
13. Nix · J. Mech. Phys. Solids · 1998 · 46 · 41110.1016/S0022-5096(97)00086-0 ↗
14. Cahn · Philos. Mag · 2001 · 81 · 140910.1080/01418610108214448 ↗