journal article·2003-06

Sintering of Al2O3–NbC composites using TiO2 and MnO additives: preliminary results

W Acchar, D Schwarze, P Greil

Materials Science and Engineering: A· Volume 351· Issue 1-2
Publisher page

Abstract

Abstract Cemented carbides have been replaced by ceramic composites in the manufacture of cutting tools characterized by high cutting speeds and hot hardness. Liquid-phase sintering of Al2O3–NbC composites using TiO2 and MnO was studied in an attempt to produce dense composites at relatively lower temperatures than those characteristic of pressure-assisted processes. The sintering behavior of the composite was assessed from a dilatometric study carried out under vacuum up to 1800 °C. The formation of crystalline phases was evaluated from X-ray diffraction analyses. Mercury porosimetry and Vicker's microhardness tests were also carried out. Liquid phase sintering took place with the formation of a non-volatile liquid over 1300 °C. TiO2 and MnO were effective in densifying Al2O3 to >95% TD at sintering temperatures as low as 1550 °C. Upon cooling, both crystalline and vitreous phases were formed but they did not affect the hardness of the composite (∼18 GPa).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Xue · J. Am. Ceram. Soc. · 1991 · 74 · 201110.1111/j.1151-2916.1991.tb07825.x ↗
2. Erkalfa · Ceram. Int. · 1998 · 24 · 8110.1016/S0272-8842(97)00082-5 ↗
3. Kostic · Powder Metall. Int. · 1987 · 19 · 41
4. S.R. Pereira, V.C. Pandolfelli, J.A. Rodrigues. Proceedings of the 39th Ceramic Congress in Águas de Lindoia-SP, Brazil, junho de 1995, p. 588–593.
5. Pasotti · Int. J. Refractory Metals Hard Mater. · 1998 · 16 · 42310.1016/S0263-4368(98)00053-5 ↗
6. Chae · J. Am. Ceram. Soc. · 1993 · 76 · 185710.1111/j.1151-2916.1993.tb06660.x ↗
7. Chae · J. Am. Ceram. Soc. · 1995 · 78 · 25710.1111/j.1151-2916.1995.tb08398.x ↗
8. Tai · J. Am. Ceram. Soc. · 1998 · 81 · 167310.1111/j.1151-2916.1998.tb02531.x ↗
9. Brandt · Mater. Technol. · 1999 · 14 · 1710.1080/10667857.1999.11752806 ↗
10. Ishigaki · J. Mater. Sci. Lett. · 1989 · 8 · 67810.1007/BF01730440 ↗
11. Acchar · J. Eur. Ceram. Soc. · 2000 · 20 · 176510.1016/S0955-2219(00)00060-1 ↗
12. Moreira · J. Eur. Ceram. Soc. · 1996 · 16 · 108910.1016/0955-2219(96)00024-6 ↗
13. W. Acchar, M.Sc. Dissertation, Brazil, 1985.
14. R.M. Rocha, J.C. Bressiani, A.H.A. Bressiani, Proceeding of Second International Latin-American Powder Metallurgy Congress, Foz do Iguaçu, PR, Brazil, December 1999.
15. Stearns · J. Am. Ceram. Soc. · 1996 · 79 · 301310.1111/j.1151-2916.1996.tb08071.x ↗