journal article·2004-10

Water atomised aluminium alloy powders

O.D. Neikov, G.I. Vasilieva, A.V. Sameljuk, A.V. Krajnikov

Publisher page

Abstract

The new rapid solidification (RS) process based on high-pressure water atomisation (WA) of the melt for manufacturing of advanced aluminium alloys was realised in the form of a pilot plant. The problems of safe operation in the course of Al alloy powder production and powder quality were solved by the use of water solutions of inhibitors, by the control of suspension temperature and hydrogen ion exponent (pH), by the hydraulic classification of atomised products, and by the optimisation of dehydration procedure. The rate of powder–water interaction strongly depends on the value of pH. While the rate of room temperature reactions is very slow at pH 3.0–4.0, the increase of pH to 6.0 leads to an intensive powder oxidation. A set of powder metallurgy (PM) alloys for various applications was produced on the base of water atomised powders. The characteristics of tensile strength of such alloys essentially exceed those of cast materials of similar compositions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Material Properties and Applications · Advanced Theoretical and Applied Studies in Material Sciences and Geometry · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. V.I. Dobatkin, V.I. Elagin, V.M. Fedorov, Rapidly Solidified Aluminium Alloys, All-Russian Institute of Light Alloys, Moscow, 1995 (in Russian).10.1007/BF00711654 ↗
2. Eskin · Technol. Light Alloys · 2000 · 2 · 17
3. B.I. Bondarev, Y.V. Shmakov, Technology of Manufacturing of Rapidly Solidified Aluminium Alloys, All-Russian Institute of Light Alloys, Moscow, 1997 (in Russian).
4. Neikov · Mater. Sci. Forum · 1996 · 217–222 · 164910.4028/www.scientific.net/MSF.217-222.1649 ↗
5. O.D. Neikov, Water atomised powder technology for advanced aluminium alloy production, in: K. Kosuge, H. Nagai (Eds.), Proceedings of the 2000 Powder Metall. World Congress, vol. 1, Kyoto, Japan, 1–16 November 2000, Japan Soc. Powder and Powder Metallurgy, Kyoto, Japan, 2000, pp. 464–466.
6. O.D. Neikov, Rapidly solidified aluminium alloy powder, in: Proceedings of the 1998 Powder Metall. World Congress, vol. 1, Granada, Spain, 18–22 October 1988, European Powder Metallurgy Association, Bellstone Shrewsbury, UK, 1998, pp. 129–134.
7. O.D. Neikov, A.V. Krajnikov, A.V. Sameljuk, G.I. Vasilieva, N.G. Chaykina, explosion-security of manufacture processes of advanced water atomized aluminum alloy P/M technology, in: V. Arnold, Chiu-Lung Chu, W.F. Jandeska, H.I. Sanderow (Eds.), Advances in Powder Metallurgy and Particulate Materials, vol. 3, Orlando, Fl, 16–21 June, Metal Powder Industries Federation, Princeton, New Jersey, USA, 2002, pp. 60–69.
8. A.K. Lokenbah, N.A. Zaporina, L.K. Lepiny, Phase composition and structure of oxide films on the fine aluminium powder particles, in: Proceedings of the LatSSR Academy of Sciences, vol. 1, Series Chemic, 1981, pp. 45–54 (in Russian).
9. Solid phase consolidation of fine grained WC-16% wt Co hard metals
10. O.D. Neikov, Yu.V. Milman, D.B. Miracle, D.V. Lotsko, A.I. Sirko, N.A. Yefimov, Effect of Sc alloying additions on structure and mechanical properties of PM and cast high-strength Al alloys of same composition, in: Proceedings of the 2001 European Congress and Exhibition on Powder Metallurgy, vol. 2, Nice, France, 22–24 October 2001, European Powder Metallurgy Association, Bellstone Shrewbury, UK, 2001, pp. 219–224.
11. Properties of rapidly solidified powder alloys of the Al–Zn–Mg system10.4028/www.scientific.net/MSF.396-402.1223 ↗
12. O.D. Neikov, Yu.V. Milman, D.B. Miracle, D.V. Lotsko, A.I. Sirko, N.P. Zakharova, Effect of powder size on mechanical properties of elevated temperature aluminium alloys produced by water atomization, in: Proceedings of the 2001 European Congress and Exhibition on Powder Metallurgy, vol. 2, Nice, France, 22–24 October 2001, European Powder Metallurgy Association, Bellstone Shrewbury, UK, 2001, pp. 225–230.