journal article·2003-10Open access

Structural evolution and drawability in laser dieless drawing of fine nickel wires

Yonggang Li, Nathaniel R Quick, Aravinda Kar

Materials Science and Engineering: A· Volume 358· Issue 1-2

Abstract

Abstract Drawability of Nickel 200 wires in laser dieless drawing was investigated. Influencing factors under consideration include the laser power, the heat-treatment state (as-drawn or annealed), and the initial wire diameter. Microstructural evolutions in laser dieless drawing were studied by scanning electron microscopy (SEM). The wires exhibit optimal drawability at an intermediate laser power range corresponding to the wire temperature in the range of 1000–1300 K. The as-drawn precursor wire has better drawability than that of the annealed wire. The drawability decreases as the precursor wire diameter deceases. Microcrystalline structures were found in nickel 200 wires after being laser-drawn from as-drawn precursor wires. These experimental observations are explained using the concepts of dynamic recovery and recrystallization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Li · J. Mater. Process. Technol. · 2002 · 123 · 45110.1016/S0924-0136(02)00110-3 ↗
2. Li · J. Laser Appl. · 2002 · 14 · 110.2351/1.1475337 ↗
3. Weiss · Wire J. · 1969 · 9 · 182
4. H. Sekiguchi, K. Kobatake, K. Osakada, Proceedings of the 15th MTDR Conference, Birmingham, 1974.
5. J.M. Alexander, T.W. Turner, Proceedings of the 15th MTDR Conference, Birmingham, 1974.
6. Sekiguchi · J. Soc. Technol. Plast. · 1976 · 17 · 67
7. H. Sekiguchi, K. Kobatake, K. Osakada, In: Advanced Technology of Plasticity 1987, vol. I, Stuttgart, FRG, August 24–28, Springer-Verlag, 1987.10.1007/978-3-662-11046-1_33 ↗
8. Kawaguchi · Wire J. Inter. · 1991 · 24 · 53
9. Tiernan · Wire J. Inter. · 1999 · 32 · 94
10. Hashmi · J. Mech. Eng. Sci. · 1982 · 24 · 110.1243/JMES_JOUR_1982_024_003_02 ↗
11. G.R. Symmons, M.S.J. Hashmi, H. Parvinmehr, Plasto-hydrodynamic, dieless wire drawing: theoretical treatment and experimental results, in: Developments in the Drawing of Metals, The Metals Society, London, 11–13 May, 1983.
12. Karimi Taheri · Mater. Sci. Technol. · 1995 · 11 · 113910.1179/mst.1995.11.11.1139 ↗
13. Nordell · J. Mater. Process. Technol. · 1994 · 45 · 55710.1016/0924-0136(94)90398-0 ↗
14. Jean · Wire J. Inter. · 1994 · 27 · 110
15. Tashiro · J. Inst. Metals · 1991 · 55 · 123210.2320/jinstmet1952.55.11_1232 ↗
16. Rao · Metall. Trans. A · 1993 · 24A · 255910.1007/BF02646534 ↗
17. Mehta · J. Mater. Sci. · 1992 · 27 · 357010.1007/BF01151834 ↗
18. Zimmer · Metal Sci. · 1983 · 17 · 19810.1179/030634583790420970 ↗
19. Michalski · 1991 · 202
20. Shapiro · Metall. Trans. · 1971 · 2 · 138510.1007/BF02913364 ↗
21. Richardson · Acta Metall. · 1966 · 14 · 122510.1016/0001-6160(66)90240-9 ↗
22. Sah · J. Aust. Inst. Metals · 1969 · 14 · 292
23. Luton · Acta Metall. · 1969 · 17 · 103310.1016/0001-6160(69)90049-2 ↗
24. Sah · Metal Sci. · 1974 · 8 · 32510.1179/msc.1974.8.1.325 ↗
25. Gandhi · Metall. Trans. · 1982 · 13A · 123310.1007/BF02645506 ↗
26. Mohamed · Mater. Sci. Eng. A · 2001 · 298 · 110.1016/S0928-4931(00)00190-9 ↗
27. Zhilyaev · Mater. Phys. Mech. (Russia) · 2000 · 1 · 98
28. McFadden · Mater. Lett. · 2000 · 45 · 34510.1016/S0167-577X(00)00131-2 ↗
29. Floreen · Scripta Met. · 1967 · 1 · 1910.1016/0036-9748(67)90006-3 ↗