journal article·2005-10Open access

A study of the crack wake closure/opening behaviour of short fatigue cracks and its influence on crack growth

X.P. Zhang, C.H. Wang, L. Ye, Y.-W. Mai

Materials Science and Engineering: A· Volume 406· Issue 1-2

Abstract

Abstract Crack closure behaviour has long been found to have a significant influence on fatigue crack growth and a large amount of research has been done in the past 3 decades. Whereas the majority of these research efforts focus on long cracks, relatively little is known for short fatigue cracks, in particular for microstructurally short cracks. This paper presents a quantitative characterisation of the wake closure/opening behaviour of microstructurally short fatigue cracks under cyclic loading for a structural aluminium alloy 2024-T351 using an in situ SEM fatigue testing system. The results clearly indicate that crack closure level was at a peak value at crack lengths of ∼100–150 μm. Beyond the regime of short crack growth, the crack closure stress decreases gradually with crack length, approaching asymptotically to a constant value at crack lengths of about 1.5 mm. In addition, it was found that the crack closure/opening stress intensity factor, K cl ( K op ), is nearly constant while the maximum stress intensity factor increases with crack size. Therefore, the effect of crack closure is most significant in the early stage of short fatigue crack propagation. The experimental results have also been compared with those predicted by Newman's model and a model previously developed by the authors.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Fire effects on concrete materials · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Elber · Eng. Fract. Mech. · 1970 · 2 · 3710.1016/0013-7944(70)90028-7 ↗
2. Snih · Eng. Fract. Mech. · 1974 · 6 · 1910.1016/0013-7944(74)90044-7 ↗
3. Lindley · Mater. Sci. Eng. · 1974 · 14 · 28110.1016/0025-5416(74)90109-8 ↗
4. Morris · Metall. Trans. · 1977 · 8A · 59710.1007/BF02676981 ↗
5. Budiansky · J. Appl. Mech. · 1978 · 45 · 26710.1115/1.3424286 ↗
6. J.A. Vazquez, A. Morrone, J.C. Gasco, ASTM STP677 (1979) 187–197.
7. H. Sehitoglu, Fract. Mech. ASTM STP868 (1983) 361–380.
8. Sehitoglu · Eng. Fract. Mech. · 1985 · 21 · 32910.1016/0013-7944(85)90021-9 ↗
9. Suresh · 1983 · 227
10. J.C. Newman Jr., W. Elber (Eds.), Mechanics of Fatigue Crack Closure, ASTM STP982, 1988.10.1520/STP982-EB ↗
11. Miller · 1991
12. James · 1997
13. Kujawski · Int. J. Fatigue · 2001 · 23 · 73310.1016/S0142-1123(01)00023-8 ↗
14. Sarma · Int. J. Fatigue · 2001 · 23 · 74110.1016/S0142-1123(01)00035-4 ↗
15. K. Sadanandaa, Dorai-Nirmal V. Ramaswamy, Philos. Mag. A 81 (2001) 1283–1303.10.1080/01418610108214441 ↗
16. Lang · 1999 · 1033
17. Suresh · Int. Met. Rev. · 1984 · 29 · 44510.1179/imr.1984.29.1.445 ↗
18. R.C. McClung, H. Sehitoglu, in: J.C. Newman Jr., W. Elber (Eds.), Mechanics of Fatigue Crack Closure, ASTM STP 982, pp. 279–299.
19. Halliday · Fatigue Fract. Eng. Mater. Struct. · 1995 · 18 · 71710.1111/j.1460-2695.1995.tb00896.x ↗
20. Ravichandran · 1999 · v
21. Ritchie · 1999 · 3
22. Wang · Fatigue Fract. Eng. Mater. Struct. · 1999 · 22 · 76110.1046/j.1460-2695.1999.t01-1-00209.x ↗
23. Venkateswara Rao · Scr. Metall. · 1986 · 20 · 145910.1016/0036-9748(86)90115-8 ↗
24. Venkateswara Rao · Eng. Fract. Mech. · 1988 · 31 · 62310.1016/0013-7944(88)90105-1 ↗
25. Newman · Prog. Aerospace Sci. · 1998 · 34 · 34710.1016/S0376-0421(98)00006-2 ↗
26. Iyyer · 1986 · 213
27. Macha · Exp. Mech. · 1979 · 19 · 20710.1007/BF02324983 ↗
28. Lankford · Eng. Fract. Mech. · 1977 · 9 · 61710.1016/0013-7944(77)90074-1 ↗
29. Brown · 1982 · 41
30. M.H. Swain, in: J.M. Larsen, J.E. Allison (Eds.), Small-Crack Test Methods, ASTM STP1149, 1992, pp. 34–56.10.1520/STP15063S ↗
31. J.M. Larsen, in: J.H. Underwood, R. Chait, et al. (Eds.), Fracture Mechanics, ASTM STP905, 1986, pp. 226–238.
32. J.M. Larsen, J.R. Jira, K.S. Ravichandran, in: J.M. Larsen, J.E. Allison (Eds.), Small-Crack Test Methods, ASTM STP1149, 1992, pp. 57–80.10.1520/STP15064S ↗
33. J.M. Larsen, J.R. Jira, T. Weerasooriya, in: D.T. Read, R.P. Reed (Eds.), Fracture Mechanics, ASTM STP945, 1988, pp. 896–912.10.1520/STP23282S ↗
34. W.N. Sharpe Jr., J.R. Jira, J.M. Larsen, in: J.M. Larsen, J.E. Allison (Eds.), Small-Crack Test Methods, ASTM STP1149, 1992, pp. 92–115.10.1520/STP15066S ↗
35. R.P. Gangloff, D.C. Slavik, R.S. Piascik, R.H. Van Stone, in: J.M. Larsen, J.E. Allison (Eds.), Small-Crack Test Methods, ASTM STP1149, 1992, pp. 116–168.10.1520/STP15067S ↗
36. London · Metall. Trans. A · 1989 · 20A · 125710.1007/BF02647408 ↗
37. M.T. Resch, D.N. Nelson, in: J.M. Larsen, J.E. Allison (Eds.), Small-Crack Test Methods, ASTM STP1149, 1992, pp. 169–196.10.1520/STP15068S ↗
38. Halliday · Int. J. Fatigue · 1997 · 19 · 27310.1016/S0142-1123(97)00010-8 ↗
39. Zhang · Fatigue Fract. Eng. Mater. Struct. · 2002 · 25 · 14110.1046/j.8756-758x.2001.00484.x ↗
40. J.C. Newman Jr., ASTM STP748 (1981) 53–84.
41. Newman · 1982 · 6.1
42. Zhang · Key Eng. Mater. · 2000 · 183 · 21710.4028/www.scientific.net/KEM.183-187.217 ↗
43. Zhang · Int. J. Fatigue · 2002 · 24 · 52910.1016/S0142-1123(01)00161-X ↗
44. Doeker · 1982
45. Herman · Fatigue Fract. Eng. Mater. Struct. · 1988 · 11 · 30310.1111/j.1460-2695.1988.tb01183.x ↗
46. ASTM E647-95, Standard Test Method for Measurement of Fatigue Crack Growth Rates, Philadelphia, PA, 1995.
47. Zhang · Scr. Mater. · 2001 · 44 · 244310.1016/S1359-6462(01)00927-7 ↗
48. Biner · Eng. Fract. Mech. · 1994 · 47 · 110.1016/0013-7944(94)90233-X ↗
49. Murakami · 1987
50. J.E. Allison, R.C. Ku, M.A. Pompetzki, in: J.C. Newman Jr., W. Elber (Eds.), Mechanics of Fatigue Crack Closure, ASTM STP982, 1988, pp. 171–185.10.1520/STP27207S ↗
51. Rose · J. Mech. Phys. Solids · 2001 · 49 · 40110.1016/S0022-5096(00)00024-7 ↗
52. Suresh · Metall. Trans. A · 1982 · 13A · 162710.1007/BF02644803 ↗
53. Wang · J. Eng. Mater. Technol. · 2003 · 125 · 18310.1115/1.1493804 ↗