Influences of the spray deposition process on the properties of copper and copper alloys
Source abstract
Abstract
Abstract The microstructure and the mechanical properties of spray deposited materials depend critically on the conditions that are present during deposition and may be modified through changes of the processing parameters. Within the scope of the special research program at the University of Bremen, investigations of the influences of various process and production related parameters on the spray deposition behaviour and the resulting material properties of copper based materials have performed. In order to achieve a fundamental analysis, the investigations were at first focused on pure copper to eliminate influences of alloying elements. Based on these results, investigations of several copper alloys, especially Cu–Sn, Cu–Ni and Cu–Cr with different compositions have been started. The present paper gives an overview of the microstructure development of sprayed pure copper and selected copper alloys in dependence on the process parameters and the process technology supplemented by results of numerical process simulation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Materials Engineering and Processing · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Annavarapu · Metallurg. Trans. A · 1988 · 19A · 307710.1007/BF02647735 ↗
2. D. Apelian, A. Leatham, G. Gillen, Near net shape manufacturing via the osprey process, Processing of Structural Metals by Rapid Solidification, Orlando, FL (1986), 107–125.10.1007/BF03257600 ↗
3. N. Jordan, H. Harig, J. Banhart, Spray Forming of Copper Based Materials, International Conference on Powder Metallurgy & Particulate Materials PM2TEC'99, Vancouver, Canada, June 20–24, 1999.
4. Hansmann · Metall · 1999 · 53 · 182
5. J. Fischer, V. Uhlenwinkel, R. Schröder, N. Jordan, S. Hansmann, H.R. Müller, Reduction of Crack Probability during Spray Forming of Billets, Proceedings of the Extraction and Processing Division (EPD) Congress 1999, San Diego, USA, February 28–March 4 1999, in: B. Mishra (Ed.), The Minerals, Metals Materials Society, 117–128.
6. N. Jordan, H. Harig, Sprühkompaktierte Kupferbasis-Werkstoffe – Stand der Forschungs- und Entwicklungsarbeiten, Kolloquiumsband ‘Sprühkompaktieren’ 3 (1998), 31–52.
7. N. Jordan, H. Harig, Influences of Process Parameters and Alloying Elements on the Properties of Spray Deposited Copper Based Materials, Proceedings of the 4th International Conference on Spray Forming (ICSF), Baltimore, USA, 13th–15th September (1999), CD-version, session 10, paper 4.
8. J.-L. Chaboche, Viscoplastic Constitutive Equations for the Description of Cyclic and Anisotropic Behaviour of Metals, Bulletin de l'Academie des Sciences, Serie des Sciences Techniques, vol. XXV (1977), No. 1 33.
9. J. Lemaitre, J.-L. Chaboche, Mechanics of Solid Materials, Cambridge University Press, Cambridge/New York/New Rochelle/Melbourne/Sidney (1990).
10. L.M. Kachanov, Introduction to Continuum Damage Mechanics, Martinus Nijhoff, Dordrecht/Boston/Lancaster (1986).10.1007/978-94-017-1957-5 ↗
11. L. Lemaitre, A Course on Damage Mechanics, Springer, Berlin, Heidelberg, New York (1996).10.1007/978-3-642-18255-6 ↗
12. R. Schröder, R. Kienzler, Numerische Untersuchungen an sprühkompaktierten bolzenförmigen Deposits, Kolloquiumsband ‘Sprühkompaktieren’ 3 (1998), 93–114.
13. F. Richter, Die physikalischen Eigenschaften von metallischen Werkstoffen, METALL, Internationale Zeitschrift für Technik und Wirtschaft, METALL-Verlag Berlin (1991), Heft 6: 582–589.
14. U. Fritsching, D. Bergmann, U. Heck, K. Bauckhage, Modellierung und Simulation des Sprühkompaktierprozesses, Kolloqiumsband 2 des Sonderforschungsbereichs 372 der Universität Bremen (1997).
15. H.D. Baehr, Thermodynamik, Springer, Berlin (1981), 5. Auflage.
16. F. Bosnjakovic, Technische Thermodynamik, Steinkopff Verlag Darmstadt (1988), 7. Auflage.
17. G. Gottstein, Rekristallisation metallischer Werkstoffe, Deutsche Gesellschaft für Metallkunde e.V.
18. Annavarapu · The Internatl. J. Powder Metall. · 1993 · 29 · 331
19. W.G. Watson, Thermal and Microstructural Characterization of Spray Cast Copper Alloy Strip, Proceedings of the First International Conference on Spray Forming (ICSF), Swansea (UK), 17th–19th September (1990); pp. 23.01–23.20.