journal article·2002-03

Specific enthalpy measurement in molten metal spray

Marko Buchholz, Volker Uhlenwinkel, A.v Freyberg, Klaus Bauckhage

Publisher page

Abstract

A caloric probe to measure average specific enthalpies of molten metal droplets in a spray cone of a free fall atomizer was developed. Molten tin was used in this caloric probe to collect the particles of the spray. The results of standard deviation of the consistency measurements were examined comprehensively. The experiments were made with low carbon steel, bearing steel AISI 52100 and copper. The process parameters, gas mass flow rate and melt mass flow rate were varied. The specific enthalpy within the spray cone clearly decreased with increasing radial distance from the center of the spray cone and with increasing axial distance to the nozzle. A correlation between median particle diameter and average specific enthalpy was clearly observed. Experimental results are compared with data from numerical simulations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Particle Dynamics in Fluid Flows · High-Temperature Coating Behaviors · Fluid Dynamics and Heat Transfer

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Mathur · J. Metals · 1989 · 41 · 23
2. P. Mathur, D. Apelian, Modeling of the solification process during spray casting, in: Proc. Modeling and Control of Casting and Welding Processes, TMS/AIME, Palm C., USA, 1988, pp. 275–285
3. Grant · Acta Metall. Mater. · 1993 · 41 · 309710.1016/0956-7151(93)90039-U ↗
4. Lee · Acta Metall. Mater. · 1994 · 42 · 323110.1016/0956-7151(94)90421-9 ↗
5. Su · Met. Mat. Trans. B · 1997 · 28B · 124910.1007/s11663-997-0080-9 ↗
6. S.J. Pien, H. Ding, M.K. Chyu, Modeling of the Multi-Phase Transport Phenomena and Solidification in a Spray Forming Process with a Linear Nozzle, Sprühkompaktieren–Kolloquium des SFB 372, Band 2, Universität Bremen, 1997, pp. 17–27, ISBN 3-88722-388-8.
7. H. Liu, Berechnungsmodell für die Geschwindigkeiten und die Abkühlung von Tropfen im Sprühkegel einer Stahl-Zerstäubungsanlage PhD Thesis, University of Bremen, 1990
8. Pryds · J. Modelling Simul. Mater. Sci. Eng. · 1999 · 7 · 43110.1088/0965-0393/7/3/310 ↗
9. A.V. Freyberg, H. Henein, V. Uhlenwinkel, M. Buchholz, Droplet Solidification and Gas-Droplet Thermal Coupling in the Atomization of a Cu-6Sn Alloy, Metall. Mat. Trans., in press.
10. J.E. Fischer, R.L. Kozarek, A Probe to Measure the Particle Enthalpy at Impact during Spray Forming Process, Proc. TMS-Congress 1999, 343–357, San Antonio, USA
11. Tuffile · J. Mat. Syn. Proc. · 1997 · 5 · 1
12. C.T. Crowe, Challenges in Numerical Simulation of Metal Sprays in Spray Forming Processes, Kolloquium des SFB 372, Bd. 2, ISBN 3-88722-388-8, University of Bremen.
13. D. Bergmann, U. Fritsching, K. Bauckhage, Averaging thermal conditions in molten metal sprays, Proc. TMS-Congress 1999, San Diego, USA.
14. V. Uhlenwinkel, M. Buchholz, C. Kramer, K. Bauckhage, The Characterization of the Spray Cone of a Free Fall Atomizer and its Influence on the Spray Forming, Process Proc. International Conference on Powder Metallurgy, October 18–22, 1998, Granada, Spain.
15. C. Kramer, Die Kompaktierungsrate beim Sprühkompaktieren von Gauß-förmigen Deposits, PhD Thesis, University of Bremen, 1997
16. D. Bergmann, Modellierung des Sprühkompaktierprozesses für Kupfer-und Stahlwerkstoffe, PhD Thesis, University of Bremen, 2000
17. D. Bergmann, private communications, unpublished data, 2000
18. D. Bergmann, U. Fritsching, K. Bauckhage, Coupled Simulation of Molten Metal Droplet Sprays, Proc. of 8th Int. Symp. Comp. Fluid Dynamics, September 8–10, 1999, Bremen, Germany.
19. U. Fritsching, H. Zhang, K. Bauckhage, Modelling of Thermal Histories and Solidification in the Spray Cone and Deposit of Atomised and Compacted Metals, Proc. Int. Conf. of Spray Forming, ICSF-2, September 9–11, Cardiff, UK
20. Crowe · J. Fluids Eng. · 1977 · 99 · 32510.1115/1.3448756 ↗
21. Ranz · Chem. Eng. Prog. · 1952 · 48 · 141
22. Landolt-Börnstein. Zahlenwerte und Funktionen, 2.Teil, Bandteil b, Springer-Verlag, 1964
23. F. Richter. Physikalische Eigenschaften von metallischen Werkstoffen, Metall, vol. 45, 1991, p. 582