Hardness and flow strength in particulate metal matrix composites
Source abstract
Abstract
Strain hardening and damage by particle cracking effects on the correlation between hardness and tensile/compressive flow stress have been assessed for several metal matrix composites. The Vickers hardness value (in kg mm(-2)) is equivalent to 0.3 times the compressive flow stress (in MPa) at an applied strain which is small (1-2%) for composites with high strength matrices or large (4-7%) for composites with low strength matrices. The strain at which the parameters correlate increases with the material's strain hardening exponent. A similar correlation is observed in tension only when damage has little effect on the strain hardening rate of the material. Damage introduced during fabrication may have a deleterious effect on the hardness tensile flow stress correlation while the effect of damage developed during the tensile deformation is more limited. For most cases the use of hardness to predict the tensile flow stress is likely to lead to significant over-estimates. (C) 2002 Elsevier Science B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Shen · Scripta Mater. · 2000 · 42 · 42710.1016/S1359-6462(99)00368-1 ↗
2. Hunt · Scripta Metall. Mater. · 1991 · 25 · 1510.1016/0956-716X(91)90154-S ↗
3. Lewandowski · Scripta Metall. Mater. · 1991 · 25 · 2110.1016/0956-716X(91)90347-4 ↗
4. Kiser · Acta Mater. · 1996 · 44 · 346510.1016/1359-6454(96)00028-6 ↗
5. González · Scripta Mater. · 1996 · 35 · 9110.1016/1359-6462(96)00100-5 ↗
6. Nan · Acta Mater. · 1996 · 44 · 380110.1016/1359-6454(96)00008-0 ↗
7. Poole · Scripta Mater. · 1998 · 39 · 128110.1016/S1359-6462(98)00326-1 ↗
8. Cáceres · Alum. Trans. · 1999 · 1 · 1
9. Lewandowski · Mater. Sci. Eng A · 1989 · 107 · 24110.1016/0921-5093(89)90392-4 ↗
10. A.L. Grow, J.J. Lewandowski, SAE Trans, Paper #950260, 1995.10.4271/950260 ↗
11. S.N. Patankar, A.L. Grow, R.W. Margevicius, J.J. Lewandowski, in: V. Ravi, T.S. Srivatson, J.J. Moore (eds.), Processing and Fabrication of Advanced Materials III, The Minerals, Metals and Materials Society (TMS), Warrendale, PA, 1994, p. 733.
12. Tabor · 1951
13. Atkins · J. Mech. Phys. Solids · 1965 · 13 · 14910.1016/0022-5096(65)90018-9 ↗
14. M.C. Shaw, G.J. DeSalvo, Met. Eng. Q. 12 (1972) 1.
15. M.C. Shaw, G.J. DeSalvo, Trans. ASME J. Eng. Ind. 92 (1970) 480.10.1115/1.3427786 ↗
16. Alcala · Acta Mater. · 2000 · 48 · 345110.1016/S1359-6454(00)00140-3 ↗
17. Brown · Phil. Mag. · 1971 · 23 · 118510.1080/14786437108217405 ↗
18. Brown · Phil. Mag. · 1971 · 23 · 120110.1080/14786437108217406 ↗
19. Ashby · 1971
20. Cáceres · Acta Mater. · 1996 · 44 · 1510.1016/1359-6454(95)00171-6 ↗
21. Lewandowski · Int. Mater. Rev. · 1998 · 43 · 14510.1179/imr.1998.43.4.145 ↗