journal article·2002-09

Damping characteristics of a CuZnAlNi shape memory alloy

Marı́a Ofelia Moroni, Rodrigo Saldivia, Mauricio Sarrazin, Aquiles Sepúlveda

Materials Science and Engineering: A· Volume 335· Issue 1-2
Publisher page

Abstract

Abstract In this paper the mechanical behavior of copper-based SMA bars and their potential use for dissipating seismic energy is examined. In particular, results obtained from cyclic tests under tension–compression loading of martensitic CuZnAlNi shape memory alloy bars, with two different processing histories (hot rolled or extrusion), are reported as a function of strain amplitude, grain size and frequency. The stress–strain loops were asymmetric with respect to the central point and rather stable, especially for strains up to 2%. The effective module of elasticity diminishes significantly with strain. From hysteretic cycles, an equivalent damping of 12% was obtained for the larger strains imposed. The maximum tensile strain attained before fracture was 3.5%. Frequency, in the range of interest for seismic applications, had only a small influence on the damping values. For the conditions studied in this research, the bars produced from both processing histories presented similar mechanical properties. Fracture, when it occurred, was due to tensile action and it was rather brittle and intergranular.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Masonry and Concrete Structural Analysis · Structural Engineering and Vibration Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. Naeim · 1999
2. Soong · 1997
3. S. Saadat, J. Salichs, L. Duval, M. Noori, Z. Hou, I. Bar-on, H. Davoodi, Utilization of Shape Memory Alloys (SMAs) for Structural Vibration Control (SVC), 1999. http://me.wpi.edu/clpsi/presentations/report-japan-02-99/repport-us-japan-02-99.html
4. Y. Liu, J. Van Humbeeck, Damping Capacity of Shape Memory Alloys, Brite-Euram MANSIDE PROJECT (Memory Alloys for New Seismic Isolation and Energy Dissipation Devices) Final Workshop, 1999, pp. II59–II80.10.1007/978-3-642-59768-8_4 ↗
5. M.G. Castellano, M. Indirli, A. Martelli, J. Azevedo, G. Sincraian, D. Tirelli, V. Renda, G. Croci, M. Biritognolo, A. Bonci, A Viskovic, Seismic protection of cultural heritage using shape memory alloy devices—an EC funded project (ISTECH), Proceedings of the Post-Smirt Conference Seminar on Seismic Isolation, Passive Energy Dissipation and Active Control of Vibrations of Structures, Cheju, Korea, 1999, pp. 417–443.
6. P.R Witting, F.A Cozzarelli, Shape Memory Structural Dampers: Materials Properties, Design and Seismic Testing, Technical Report MCEER 92-0013, State University of New York, Buffalo, USA, 1992.
7. Y. Gillet, E. Patoor, M. Berveiller, Beam theory applied to shape memory alloys, SMST-94, in: A. Pelton, D. Hodgson, T. Duerig (Eds.), Proceedings of the First International Conference on Shape Memory and Superelastic Technologies (Asilomar, California, March 1994), 1994, pp. 169–174.
8. Tadaki · 1998 · 97
9. J. Van Humbeeck, L. Delaey, The high damping capacity of martensitic copper–zinc–aluminium alloys, Proceedings of the International Symposium held in Conjunction with ASM's Materials Week and TMS/AIME Fall Meeting, 1985, pp. 59–65.