journal article·2004-03

Nanostructured Mg–5%Al–x%Nd alloys

L Lu, K Raviprasad, M.O Lai

Materials Science and Engineering: A· Volume 368· Issue 1-2
Publisher page

Abstract

Abstract Nanocrystalline Mg–5%Al–x%Nd (x=0.5, 1 and 5 wt.%) powders of crystalline size about 23 nm were prepared by mechanical alloying. The mechanically alloyed powders were consolidated using conventional pressing, sintering and extrusion processes. Microstructural characterisation of the consolidated specimens revealed an average crystalline size of about 90 nm. Metastable MgNd phase was found in the milled samples and this transformed into Mg12Nd on sintering. The complete transformation of MgNd into Mg12Nd was dependent upon the duration of milling and the sintering temperature. Mechanical properties in terms of 0.2% yield stress and ductility were found to increase after mechanical alloying. The increase in yield stress and ultimate tensile stress was attributed to the presence of metastable MgNd phase as well as to the reduction in grain size. The decomposition of MgNd may have contributed to the lowering of strength and enhancement of ductility in samples milled for the longest period and sintered at the highest temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. T. Mukai, K. Ishikawa, Y. Okanda, M. Mabuchi, K. Kubota, K. Higashi, in: E.W. Lee, N.J. Kim, K.V. Jata, W.E. Frazier (Eds.), Light Weight Alloys for Aerospace Application III, TMS, Warrendale, 1995, p. 483.
2. Luo · J. Mater. Sci. · 1994 · A29 · 525910.1007/BF01171534 ↗
3. Miller · Metall. Trans. A · 1991 · 22A · 87310.1007/BF02658997 ↗
4. J.S.H. Lo, G.J.C. Carpenter, in: M.L. Scotte (Ed.), Proceeding ICCM11, Australian Composite Structures Society, Gold Coast, Australia, 14–17 July 1997,p. 688.
5. Mohri · Mater. Sci. Eng. · 1998 · A257 · 28710.1016/S0921-5093(98)00853-3 ↗
6. Tsukeda · J. Jpn. Inst. Light Met. · 1999 · 49 · 28710.2464/jilm.49.287 ↗
7. Hall · Proc. Phys. Soc. · 1951 · B64 · 74710.1088/0370-1301/64/9/303 ↗
8. Petch · Iron Steel Inst. · 1953 · 174 · 25
9. Kojima · Mater. Sci. Forum · 2000 · 350–351 · 310.4028/www.scientific.net/MSF.350-351.3 ↗
10. Mabuchi · Acta Mater. · 1999 · 46 · 2024
11. Mabuchi · Mater. Sci. Technol. · 1997 · 13 · 82510.1179/mst.1997.13.10.825 ↗
12. Watanabe · Scr. Mater. · 1999 · 40 · 47710.1016/S1359-6462(98)00469-2 ↗
13. Watanabe · Scr. Mater. · 1999 · 41 · 20910.1016/S1359-6462(99)00155-4 ↗
14. Wu · J. Alloys Compd. · 2000 · 2999 · 910.1016/S0925-8388(99)00643-X ↗
15. Hwang · Scr. Mater. · 2001 · 44 · 245710.1016/S1359-6462(01)00925-3 ↗
16. Lu · Scr. Mater. · 1999 · 40 · 111710.1016/S1359-6462(99)00048-2 ↗
17. L. Lu, B.H. Chua, M. Gupta, K.K. Thong, in: D.L. Zhang, K.L. Pickering, X.Y. Xiong (Eds.), Proceedings of the 1st International Conference On Advanced Material, The Institute of Material Engineering Australia Ltd., Rotorua, New Zealand, 19–23 November 2000, p. 621.
18. Lu · Mater. Sci. Eng. A · 2001 · 334A · 163
19. Y.H. Toh, L. Lu, M.O. Lai, L. Froyen, in: K.A. Khor, T.S. Srivatsan, M. Wong, W. Zhou, F. Boey (Eds.), Proceedings and Fabrication of Advanced Material VIII, World Science, Singapore, 8–10 September 1999, p. 875.
20. Raviprasad · J. Jpn. Soc. Powder Powder Metall. · 1994 · 41 · 131510.2497/jjspm.41.1315 ↗
21. A.A. Nayeb-Hashemi, J.B. Clark, Phase Diagrams of Binary Magnesium Alloys -Monograph Series on Alloy Phase Diagrams, ASM, Metals Park, Ohio, 1988, p. 213.
22. Lu · Nanostruct. Mater. · 1998 · 10 · 55110.1016/S0965-9773(98)00102-0 ↗
23. Fecht · Nanostruct. Mater. · 1995 · 6 · 3310.1016/0965-9773(95)00027-5 ↗
24. Suryanarayana · J. Mater. Res. · 1992 · 7 · 211410.1557/JMR.1992.2114 ↗
25. J.L. Strudel, in: R.W. Cahn, P. Hassan (Eds.), Mechanical Properties in Multiphase Alloys in Physical Metallurgy, third ed., North Holland, 1983, p. 1415.
26. J.P. Ahn, M.Y. Huh, in: Advanced Material Proceeding, vol. 3, Korean Institute of Metals and Materials, Kyongju, Korea, 1995, p. 2171.