journal article·2003-08

Atomic force microscopy assessment of mechanically induced scratch damage in polypropylenes and ethylene–propylene di-block copolymers

A. Dasari, J. Rohrmann, R.D.K. Misra

Materials Science and Engineering: A· Volume 354· Issue 1-2
Publisher page

Abstract

Abstract Atomic force microscopy (AFM) in tapping mode has been used to determine the extent of surface damage induced during a scratch test in different grades of polypropylenes (PPs) and ethylene–propylene (EP) di-block copolymers. The surface damage is examined for long chain polymeric materials and their respective short chains. The extent of surface damage is evaluated in terms of average surface height of the plastically deformed region, depth of the scratch tracks, and thickness and density of the scratch tracks. The ability of the polymeric materials to resist scratch deformation under identical conditions of scratch test follows the sequence (from maximum resistance to minimum resistance): high crystallinity PPs>low crystallinity PPs>EP di-block copolymers. Also, short chain polymeric materials have greater resistance to scratch deformation than their respective long chain polymers. The scratch tracks are zigzag in PPs and parabolic in EP di-block copolymers with localized plastic flow involving voids. It is interpreted that modulus and yield strength are the determining factors that dictate the scratch resistance of polymeric materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Force Microscopy Techniques and Applications · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. J.G. Williams, Proceedings of the Conference on Polypropylene in Automotive Applications, RAPRA, Birmingham, UK, May 1989, p. 11.
2. Ashby · Acta Mater. · 2000 · 48 · 35910.1016/S1359-6454(99)00304-3 ↗
3. Briscoe · Wear · 1996 · 200 · 13710.1016/S0043-1648(96)07314-0 ↗
4. P.Z. Wang, I.M. Hutchings, S.J. Duncan, L. Jenkins, SAE, Vol. 99M-28, 1999, Technical Paper No. 1999-01-0243.10.4271/1999-01-0243 ↗
5. P.Z. Wang, I.M. Hutchings, S.J. Duncan, L. Jenkins, Proceedings of the 6th International Conference on TPOs in Automotive, Novi, MI, USA, October 22–25, 1999, p. 107.
6. K.T. Okamoto, A.J. Denicola, Jr., M.C.T. Huang, M. Van Clewenbergen, ANTEC 1993, New Orleans, May 9–13, 1993, p. 2103.
7. P.Z. Wang, I.M. Hutchings, S.J. Duncan, L. Jenkins, Proceedings of SPE Automotive Global TPO Conference, Dearborn, MI, USA, October 1–3, 2001, p. 201.
8. S. Duncan, Proceedings of the 5th International Conference on TPOs in Automotive, MI, USA, October 12–14, 1998, p. 106.
9. Chu · Polym. Eng. Sci. · 2000 · 40 · 94410.1002/pen.11222 ↗
10. Xiang · Polym. Eng. Sci. · 2001 · 41 · 2310.1002/pen.10705 ↗
11. Hongjun · J. Appl. Polym. Sci. · 1999 · 71 · 10310.1002/(SICI)1097-4628(19990103)71:1<103::AID-APP13>3.0.CO;2-5 ↗
12. Tomasetti · Nanotechnology · 1998 · 9 · 30510.1088/0957-4484/9/4/001 ↗
13. M.J. Hersman, S. Farrington, P. Horsten, SPE Conference Proceedings, ANTEC, Toronto, Canada, April 27–May 2, 1997, p. 3547.10.4271/970446 ↗
14. Tomasetti · Polymer · 2000 · 41 · 659710.1016/S0032-3861(99)00885-X ↗
15. Abbasi · Polym. Int. · 2001 · 50 · 127910.1002/pi.783 ↗
16. Veenstra · Polymer · 2000 · 41 · 181710.1016/S0032-3861(99)00337-7 ↗
17. Deanin · Polym. Eng. Sci. · 2000 · 16 · 82310.1002/pen.760161209 ↗
18. Berzin · J. Appl. Polym. Sci. · 2001 · 80 · 124310.1002/app.1210 ↗
19. Diamant · Polym. Eng. Sci. · 1989 · 29 · 22710.1002/pen.760290404 ↗
20. Weidisch · Macromolecules · 2001 · 34 · 252810.1021/ma001272p ↗
21. Yang · Polym. Eng. Sci. · 1984 · 24 · 61210.1002/pen.760240814 ↗
22. Jang · Appl. Polym. Sci. · 1985 · 30 · 248510.1002/app.1985.070300617 ↗
23. Van Gisbergen · Polymer · 1991 · 31 · 1539
24. S. Duncan, Proceedings of the 5th International Conference on TPOs in Automotive, MI, USA, October 12–14, 1998.
25. Briscoe · Polym. Eng. Sci. · 1996 · 36 · 299610.1002/pen.10702 ↗
26. Chu · Proc. Int. SAMPE Symp. · 1998 · 43 · 1149
27. T. Trangott, L. Novak, G. Meyers, Proceedings of the 6th International Conference on TPOs in Automotive, Novi, MI, USA, October 22–25, 1999.
28. Ni · J. Mater. Sci. · 1996 · 31 · 395510.1007/BF00352656 ↗
29. Dasari · Mater. Sci. Technol. · 2002 · 18 · 68510.1179/026708302225003550 ↗
30. A. Dasari, S. Duncan, R.D.K. Misra, Mater. Sci. Technol. (in press).
31. A. Dasari, S. Duncan, R.D.K. Misra, Mater. Sci. Technol. (in press).
32. A. Dasari, S. Duncan, R.D.K. Misra, Mater. Sci. Technol. (in press).
33. A. Dasari, J. Rohrmann, R.D.K. Misra, Mater. Sci. Technol. (in press).
34. A. Dasari, J. Rohrmann, R.D.K. Misra, Mater. Sci. Technol. (in press).
35. A. Dasari, S. Duncan, R.D.K. Misra, Acta Mater. (in press).
36. Bhushan · Wear · 2001 · 251 · 110510.1016/S0043-1648(01)00804-3 ↗
37. Sanford · Scripta Mater. · 2001 · 44 · 94110.1016/S1359-6462(00)00681-3 ↗
38. Bobji · Scripta Mater. · 2001 · 44 · 3710.1016/S1359-6462(00)00557-1 ↗
39. Cretegny · Acta Mater. · 2001 · 49 · 375510.1016/S1359-6454(01)00271-3 ↗
40. Sriram · Acta Metall. Mater. · 1993 · 41 · 251510.1016/0956-7151(93)90332-M ↗
41. Harvey · Acta Metall. Mater. · 1994 · 42 · 349310.1016/0956-7151(94)90481-2 ↗
42. Withers · Mater. Sci. Technol. · 2001 · 17 · 35510.1179/026708301101509980 ↗
43. Copeau · Phil. Mag. A · 1997 · 76 · 113910.1080/01418619708214219 ↗
44. Brink · Mater. Sci. Eng. A · 1998 · 258 · 3710.1016/S0921-5093(98)00914-9 ↗
45. Small · Scripta Metall. Mater. · 1995 · 32 · 157310.1016/0956-716X(94)00024-C ↗
46. Brink · Mater. Sci. Eng. A · 1997 · 239–240 · 18010.1016/S0921-5093(97)00579-0 ↗
47. Briscoe · Polym. Int. · 1997 · 43 · 35910.1002/(SICI)1097-0126(199708)43:4<359::AID-PI772>3.0.CO;2-C ↗
48. Xiang · Polym. Eng. Sci. · 2001 · 41 · 2310.1002/pen.10705 ↗
49. Van der Waal · Polymer · 1998 · 39 · 547710.1016/S0032-3861(97)10279-8 ↗
50. Pegoretti · Polymer · 2000 · 41 · 185710.1016/S0032-3861(99)00333-X ↗
51. P.Z. Wang, I.M. Hutchings, S.J. Duncan, L. Jenkins, Proceedings of SPE Automotive TPO Global Conference 2001, Detroit, USA, 2001, pp. 201–211.
52. J. Chu, L. Rumano, B. Colman, Polym. Engi. Sci. 38 (1998) 1906.10.1002/pen.10361 ↗