journal article·2004-03

Microstructure and mechanical properties of Ti-aluminides reinforced Ti matrix composites synthesized by pulsed current hot pressing

K Mizuuchi, K Inoue, M Sugioka, M Itami, M Kawahara

Materials Science and Engineering: A· Volume 368· Issue 1-2
Publisher page

Abstract

Abstract Ti-aluminides reinforced Ti matrix composites were fabricated by a pulsed current hot pressing technique, in that a combustion synthesis reaction occurs at the interface between Ti and Al foils. This reaction causes the formation of multi layered Ti-aluminides between Ti foils, and these Ti and Ti-aluminides were densified and bonded to each other. The composites thus fabricated were of alternately laminated structure. With increasing the thickness of Al foils used, the thickness of Al 3 Ti layer formed in Ti-aluminides increased. These composites became strong in tensile strength at room temperature, which is related to the thickness of the Al foils. The tensile strength and the elongation of a composite produced from 0.04 mm thick Ti and 0.012 mm thick Al foils was about 700 MPa and 3.5%, respectively, while they are about 420 MPa and 2.6% for a composite produced from 0.04 mm thick Ti and 0.024 mm thick Al foils. This good ductility of the composite is considered to prevent the propagation of numerous cracks emanating from the Ti-aluminides when reaching Ti layers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · Electromagnetic Effects on Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Walters · Metall. Trans. · 1970 · 1 · 1221 29
2. Mendiratta · Metall. Trans. A · 1991 · 22A · 157310.1007/BF02667370 ↗
3. E. Fitzer, W. Remmele, in: W.C. Harrigan Jr., J.R. Strife, A.K. Dhingra, (Eds.), Proceedings of the 5th International Conference on Composite Materials, ICCM-V, TMS, Warrendale, PA, 1985, pp. 515–30.
4. Dave · Acta Metall. Mater. · 1990 · 38 · 149110.1016/0956-7151(90)90117-Y ↗
5. Nardone · Metall. Trans. A · 1991 · 22A · 18310.1007/BF03350960 ↗
6. Maloney · Mater. Sci. Eng. · 1992 · A155 · 1910.1016/0921-5093(92)90309-O ↗
7. Alman · Mater. Sci. Eng. · 1992 · A155 · 8510.1016/0921-5093(92)90315-R ↗
8. Mizuuchi · KAGAKU TO KOGYO · 2000 · 74 · 100
9. K. Mizuuchi, K. Inoue, K. Hamada, M. Sugioka, M. Itami, Y. Okanda, M. Kawahara, in: P.F. Gobin, C.M. Friend (Eds.), Proceedings of the SPIE EUROPTO Series on 5th European Conference on Smart Structures and Materials, vol. 4073, SPIE, Bellingham, WA, USA, 2000, p. 78.
10. Tamari · J. Ceram. Soc. Jpn. · 1995 · 103 · 12
11. Sugiyama · J. Jpn. Inst. Met. · 1998 · 62 · 108210.2320/jinstmet1952.62.11_1082 ↗
12. M. Omori, H. Sakai, A. Okubo, M. Kawahara, M. Tokita, T. Hirai, Proceedings of the third International Symposium on Structural and Functionally Gradient Materials, 1994, p. 37.
13. K. Mizuuchi, K Inoue, K. Hamada, M. Sugioka, M. Fukusumi, M. Itami, M. Kawahara, in: D. Hui (Ed.), 8th Annual International Conference on Composites Engineering, ICCE, New Orleans, LA, USA, 2001, p. 643.
14. K. Mizuuchi, M. Sugioka, M. Fukusumi, M. Itami, M. Kawahara, KAGAKU TO KOGYO, vol. 76, 2002 (in Japanese).
15. Alman · JOM · 1994 · 46 · 3110.1007/BF03220646 ↗
16. Alman · Metall. Mater. Trans. A · 1995 · 26A · 58910.1007/BF02663908 ↗
17. Enoki · J. Jpn. Inst. Met. · 2000 · 64 · 107610.2320/jinstmet1952.64.11_1076 ↗