journal article·2006-05

Stress and strain histories in equal channel angular extrusion/pressing

A.V. Nagasekhar, Yip Tick-Hon, S. Li, H.P. Seow

Materials Science and Engineering: A· Volume 423· Issue 1-2
Publisher page

Abstract

Severe plastic strains induced in the material via multiple equal channel angular extrusions (ECAEs)/pres sings can produce bulk ultrafine grains suitable for structural applications. These severe strains were induced so far with a range of channel angles from 60 degrees to 160 degrees. However, to produce sound ultrafine grain billets and to design an optimized ECAE die, the knowledge of stress-strain histories, and punch force requirements are very important. This can be carried out with the help of finite element analysis, which is an appropriate tool for such studies when real-like conditions can also be considered. Accordingly, the current study was carried by using Abaqus/Explicit for a range of channel angles: 60-150 degrees, with an outer comer angle of 10 degrees and with considerations of realistic parameters like strain hardening of material and the influence of friction. The least difference between the effective strains, at different points, was achieved with channel angle of 90 degrees, and the maximum principal stress values are lower with the same channel angle compared to other channel angles studied. Peak punch force requirements are gradually decreased with the increase in channel angle. (c) 2006 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Valiev · Prog. Mater. Sci. · 2000 · 45 · 10310.1016/S0079-6425(99)00007-9 ↗
2. Segal · Mater. Sci. Eng. · 1995 · A197 · 15710.1016/0921-5093(95)09705-8 ↗
3. Haouaoui · Metall. Mater. Trans. · 2004 · 35A · 293510.1007/s11661-004-0241-2 ↗
4. A.V. Nagasekhar, U. Chakkingal, P. Venugopal, J. Manu. Proc., in press.
5. Iwahashi · Scripta Mater. · 1996 · 35 · 14310.1016/1359-6462(96)00107-8 ↗
6. Oh · Mater. Sci. Eng. · 2003 · A343 · 10710.1016/S0921-5093(02)00324-6 ↗
7. Bowen · Mater. Sci. Eng. · 2000 · A287 · 8710.1016/S0921-5093(00)00834-0 ↗
8. Nakashima · Acta Mater. · 1998 · 46 · 158910.1016/S1359-6454(97)00355-8 ↗
9. Furuno · Acta Mater. · 2004 · 52 · 249710.1016/j.actamat.2004.01.040 ↗
10. Segal · Mater. Sci. Eng. · 1999 · A271 · 32210.1016/S0921-5093(99)00248-8 ↗
11. Lee · Scripta Mater. · 2000 · 43 · 11510.1016/S1359-6462(00)00377-8 ↗
12. Pragnell · Scripta Mater. · 1997 · 37 · 98310.1016/S1359-6462(97)00192-9 ↗
13. Nagasekhar · Comput. Mater. Sci. · 2004 · 30 · 48910.1016/j.commatsci.2004.02.041 ↗
14. Nagasekhar · Int. J. Manu. Sci. Tech. · 2005 · 6 · 68
15. Srinivasan · Scripta Mater. · 2001 · 44 · 9110.1016/S1359-6462(00)00546-7 ↗
16. Yang · J. Mater. Proc. Tech. · 2003 · 140 · 58310.1016/S0924-0136(03)00796-9 ↗
17. Kim · Mater. Sci. Eng. · 2002 · A328 · 31710.1016/S0921-5093(01)01793-2 ↗
18. Nagasekhar · Int. J. Nanosci. · 2005 · 4 · 74510.1142/S0219581X05003346 ↗
19. Abaqus/Explicit User's Manual, Ver. 6.3, Hibbitt, Karlsson & Sorensen Inc., USA, 2002.