journal article·2003-01

Shape memory behavior of Fe–Pd alloy thin films prepared by dc magnetron sputtering

Shozo Inoue, Kanryu Inoue, Keiji Koterazawa, Kiyoshi Mizuuchi

Materials Science and Engineering: A· Volume 339· Issue 1-2
Publisher page

Abstract

Abstract Fe–Pd films have been deposited onto fused quartz and silicon substrates by dc magnetron sputtering. When an arc-melted and homogenized Fe–30at.% Pd alloy disk was used as a sputtering target, Fe–Pd films fabricated was shown to contain about 24 at.% Pd under the deposition condition used. The target configuration was then modified by placing Pd wires on the target so as to control the Pd content of films with an accuracy of 1 at.% Pd. Fe–Pd films containing 28.5 at.% Pd underwent a thermoelastic fcc-to-fct martensite transformation after annealing at 900 °C followed by quenching into iced water. Apparently, the reverse transformation was also thermoelastic and the thermoelastic transformations occurred repeatedly upon thermal cycling. Some of the Fe–28.5at.% Pd films were peeled off from the quartz substrate and they showed SM effects upon heating after deformation. A diaphragm-shaped free-standing film was also fabricated on a thin Si substrate. This film showed attractive transformation characteristics, including a narrow transformation hysteresis loop of about 4 °C and a small temperature difference between M f and A f (about 10 °C) in addition to M s (43 °C) close to room temperature. This diaphragm-shaped film showed a reversible ballooning behavior with a maximum strain of about 0.05% upon thermal cycling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Wolf · J. Micromech. Sys. · 1995 · 4 · 20610.1109/84.475547 ↗
2. W. Van Moorleghem, C. Chandrasekaran, S. Miyazaki, Proceedings of the Fifth International Conference on New Actuator, Bremen, 1996, p. 355.
3. K.D. Skrobanek, M. Kohl, S. Miyazaki, Proceedings of the IEEE Tenth Annual International Workshop on Micro Electro Mechanical Systems, Nagoya, 1997, p. 256.
4. Webster · Phil. Mag. B · 1984 · 49 · 29510.1080/13642817408246515 ↗
5. Wayman · Scripta Metal. · 1971 · 5 · 48910.1016/0036-9748(71)90097-4 ↗
6. Tadaki · Trans. JIM · 1977 · 18 · 86410.2320/matertrans1960.18.864 ↗
7. Maki · Scripta Metal. · 1984 · 18 · 110510.1016/0036-9748(84)90187-X ↗
8. Sohmura · Scripta Metal. · 1980 · 14 · 85510.1016/0036-9748(80)90304-X ↗
9. Murray · J. Appl. Phys. · 2000 · 87 · 577410.1063/1.372518 ↗
10. James · Phil. Mag. A · 1998 · 77 · 127310.1080/01418619808214252 ↗
11. Sugiyama · Trans. Jpn Inst. Metals · 1984 · 25 · 58510.2320/matertrans1960.25.585 ↗
12. Sugiyama · J. Jpn Inst. Metals · 1984 · 48 · 88110.2320/jinstmet1952.48.9_881 ↗
13. R. Oshima, Proceedings of the International Conference on Martensitic Transformations, Nara, 1986, p. 971.
14. Wang · Mater. Trans. JIM · 2000 · 41 · 113910.2320/matertrans1989.41.1139 ↗
15. S. Inoue, K. Inoue, K. Koterazawa, K. Mizuuchi, T. Tsurui, Proceedings of the THERMEC’ 2000, Las Vegas, 2000, E08-07.pdf, J. Mater. Processing Technol., 117 (2001).
16. De Graef · IEEE Transactions on Magnetics · 2001 · 37 · 266310.1109/20.951267 ↗
17. Miyazaki · Mater. Sci. Eng. · 1999 · A273–275 · 10610.1016/S0921-5093(99)00292-0 ↗
18. Ford · Bull. Am. Phys. Soc. II · 1956 · 1 · 333
19. Miyazaki · Oyo Buturi · 2000 · 69 · 38