journal article·2000-05

Development of transient liquid phase sintered (TLPS) Sn–Bi solider pastes

X Qiao, S.F Corbin

Materials Science and Engineering: A· Volume 283· Issue 1-2
Publisher page

Abstract

Thermal analysis of pure Sn and Bi powder mixtures indicates that a transient liquid phase affect can be induced in the presence of paste chemicals. Initially liquid forms with a eutectic composition (i.e. 140°C), followed by rapid re-solidification and secondary melting at temperatures above 180°C. Upon reheating, processed solders do not remelt until temperatures above 220°C. Solder consolidation below the liquidus depends critically on the amount of liquid phase formed which in turn depends on the paste ingredients. Sn-3 to 5 wt.% Bi pastes with densities in excess of 95%, which will not remelt when reheated to the same temperature have successfully been developed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. German · 1985
2. Powder Metallurgy, in: E. Klar, A. Mills (Eds.), ASM Metals Handbook, vol. 7, ASM, Metals Park, Ohio, 1984, pp. 316–321.
3. German · Met. Trans. A · 1986 · 17A · 20510.1007/BF02643896 ↗
4. Lumley · Scripta Mater. · 1996 · 35 · 58910.1016/1359-6462(96)00195-9 ↗
5. Baek · Int. J. Powder Met. · 1986 · 22 · 235
6. Lee · Int. Powder Met. Powder Tech. · 1985 · 21 · 9
7. Acharya · Int. J. Powder Met. · 1995 · 31 · 81
8. Hu · Mat. Sci. Eng. · 1992 · A156 · 16710.1016/0921-5093(92)90148-T ↗
9. B. Reyburn S.F. Corbin, Int. J. Powder Met. (submitted).
10. B. Reyburn, Transient Liquid Phase Sintering of Binary Alloys, Master's Thesis, University of Waterloo, Waterloo, Ontario, Canada, 1999.
11. S.F. Corbin, X. Qiao, B. Reyburn, J. McIsaac, TLPS solder and brazing pastes, U.S. Provisional Patent Application, February 2000.10.1016/S0921-5093(00)00621-3 ↗
12. Powder Metallurgy, vol. 7 of the ASM Metals Handbook, ASM, Metals Park, 1984, pp. 316–321.