Thermal fracture of interfaces in precracked thermal barrier coatings
Source abstract
Abstract
Abstract Thermal barrier coatings (TBCs) make it possible to operate gas turbines, aircraft engines and diesel engines at higher temperatures, thus enabling significant improvements in the performance of these systems. In this paper, the effect of introducing surface cracks into plasma sprayed TBCs was studied. The resistance of these precracked coatings to interfacial fracture was determined both experimentally and analytically. In the experiments performed, beam-shaped specimens, with crack densities varying from 0 to 42 cracks inch −1 , were subjected to a high heat flux generated by a 1.5 kW CO 2 laser for a time interval of 4 s followed by natural convection cooling. In each case, the surface temperature which resulted in interface crack initiation was determined. Similarly, the final interfacial crack length corresponding to the different crack densities was measured as a function of maximum surface temperature. In all cases, it was shown that increasing crack density resulted in decreased interfacial cracking at the end of the thermal shock procedure. A numerical model of the experiment was developed using the finite element method and it was used to study the effect of the laser heating process on an interface crack in a precracked TBC system. The analytical results confirmed and explained the experimentally observed behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Freborg · Mater. Sci. Eng. · 1998 · A245 · 18210.1016/S0921-5093(97)00849-6 ↗
2. Nissley · J. Therm. Spray Technol. · 1997 · 6 · 9110.1007/BF02646317 ↗
3. Takeuchi · ASME J. Gas Turbines Power · 1994 · 116 · 26610.1115/1.2906803 ↗
4. Zhu · Mater. Sci. Eng. · 1998 · A245 · 21210.1016/S0921-5093(97)00852-6 ↗
5. Zhu · Surf. Coatings Technol. · 1998 · 108-109 · 11410.1016/S0257-8972(98)00669-0 ↗
6. B.D. Choules, Thermal fracture of ceramic coatings under high heat flux with time-dependent behavior, Ph.D. Thesis, Purdue University, West Lafayette, IN, 1998.
7. Kokini · J. Therm. Stresses · 1994 · 17 · 6310.1080/01495739408946246 ↗
8. B.D. Choules, K. Kokini, T.A. Taylor, Mater. Sci. Eng. A299 (2001) 296–304.10.1016/S0921-5093(00)01393-9 ↗
9. Nusier · Eng. Fract. Mech. · 1998 · 60 · 57710.1016/S0013-7944(98)00031-9 ↗
10. Miller · Eng. Fract. Mech. · 1998 · 59 · 20310.1016/S0013-7944(97)00089-1 ↗
11. Kokini · Eng. Fract. Mech. · 1991 · 38 · 37110.1016/0013-7944(91)90089-J ↗
12. Kokini · J. Therm. Stresses · 1992 · 15 · 35510.1080/01495739208946144 ↗
13. Reynolds · Int. J. Fract. · 1992 · 54 · 18510.1007/BF00028918 ↗
14. DeMasi-Marci · Surf. Coatings Technol. · 1994 · 68 · 110.1016/0257-8972(94)90129-5 ↗
15. Bartlett · J. Am. Ceram. Soc. · 1995 · 78 · 101810.1111/j.1151-2916.1995.tb08431.x ↗
16. Ruckle · Thin Solid Films · 1980 · 73 · 45510.1016/0040-6090(80)90514-3 ↗
17. I.E. Sumner, D.L. Ruckle, Development of improved-durability plasma sprayed ceramic coatings for gas turbine engines, NASA Technical Memorandum 81512, 1980.10.2514/6.1980-1193 ↗
18. K.D. Sheffler, R.A. Graziani, G.C. Sinko, JT9D Thermal Barrier Coated Vanes, NASA CR-167964, 1982.
19. N.P. Anderson, K.D. Sheffler, Development of strain tolerant thermal barrier coating systems, Task I–III, NASA CR-168251, 1983.
20. Kokini · J. Therm. Stresses · 1998 · 21 · 71510.1080/01495739808956171 ↗
21. Schulz · Int. J. Solid. Struct. · 1998 · 35 · 361510.1016/S0020-7683(97)00228-X ↗
22. Taylor · Surface Coatings Technol. · 1990 · 43-44 · 47010.1016/0257-8972(90)90098-W ↗
23. Taylor · Surf. Coatings Technol. · 1992 · 54-55 · 5310.1016/S0257-8972(09)90027-5 ↗
24. T.A. Taylor, 1991, Thermal Barrier Coating for Substrates and Process for Producing it, US Patent No. 5073433.
25. Smelser · Int. J. Fract. · 1979 · 15 · 13510.1007/BF00037829 ↗
26. Reynolds · J. Eng. Mater. Technol. · 1990 · 112 · 3810.1115/1.2903184 ↗
27. Johnsen · J. Eng. Mater. Technol. · 1995 · 117 · 30510.1115/1.2804544 ↗
28. Zhu · J. Mater. Res. · 1999 · 14 · 14610.1557/JMR.1999.0023 ↗
29. G. Thurn, G.A. Schneider, F. Aldinger, 1997, Proceedings of Thermal Stresses 1997, Rochester Institute of Technology.
30. R.F. Firestone, W.R. Logan, J.W. Adams, Creep of plasma sprayed zirconia, NASA CR-167868, 1982.10.1002/9780470318782.ch29 ↗
31. Shinde · Adv. Ceram. Mater. · 1987 · 2 · 6010.1111/j.1551-2916.1987.tb00054.x ↗
32. T.A. Taylor, and R.E. Taylor, ASM Handbook, Surface Engineering (5), 1994, pp. 654–657.10.31399/asm.hb.v05.a0001299 ↗