journal article·2001-04

Continuous versus interrupted creep in AZ91D magnesium alloy

M. Regev, O. Botstein, M. Bamberger, A. Rosen

Publisher page

Abstract

A qualitative model of the creep process of AZ91D was proposed in the past by the authors on the basis of continuous creep tests, optical and SEM metallography and TEM study. In view of this model, creep resistance in the case of interrupted creep tests is expected to be inferior compared with conventional creep test under the same load and temperature. The results of interrupted creep tests performed in the recent investigation, described in this paper, support the prediction and can be explained on the basis of the above mentioned creep model. The differences between the results of the continuous and interrupted creep test stems from microstructural instability of the alloy. This fact has been verified by heat treating of the alloy and stabilizing the microstructure. The creep behavior of the heat-treated specimens was found to be comparable to that of the as-cast pressure die casting specimen subjected to continuous creep.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Luo · J. Mater. Sci. · 1994 · 29 · 525910.1007/BF01171534 ↗
2. ASTM Standard B 93/B 93M, Vol. 02.02, 1990.
3. Aune · 1992 · 221
4. W.E. Mercer II, in: Technical Paper Series, SAE International Congress and Exposition, SAE 1990 paper no. 900788.10.4271/900788 ↗
5. D.J. Sakkinen, in: Technical Paper Series, SAE International Congress and Exposition, SAE 1994, pp. 71–82.
6. Gjestland · Mater. Sci. Eng. · 1991 · A134 · 119710.1016/0921-5093(91)90954-L ↗
7. Nussbaum · 1992 · 351
8. Raynor · 1959
9. Miller · Metall. Trans. · 1991 · A22 · 87310.1007/BF02658997 ↗
10. G. Foerester, in: 8th SDCE Int. Die Casting Exposition and Congress, Die Cast. Eng. Detroit MI (1975) paper no. G-T75-112.
11. Pekguleryuz · J. Jpn. Inst. Light Met. · 1992 · 42 · 67910.2464/jilm.42.679 ↗
12. Pekguleryuz · 1993 · 20
13. T.K. Aune, T.J. Ruden, in: Technical Paper Series SAE International Congress and Exposition SAE (1992) paper no. 920070.
14. C. Suman, in: Technical Paper Series, SAE International Congress and Exposition SAE (1991) paper no. 910416.
15. D.L. Albright, T.Kr. Aune, in: Technical Paper Series SAE International Congress and Exposition SAE (1991) paper no. 910412.
16. Lovold · Z. Metall. · 1976 · 67 · 514
17. A. Mwembela, H.J. McQueen, in: C. Bickert (Ed.), Light Metals Processing and Applications Symposium, Can. Inst. Min. Metall. Pet., Montreal, Canada, 1993, pp. 523-532.BickertC.Light Metals Processing and Applications Symposium1993523532Can. Inst. Min. Metall. Pet.Montreal, Canada
18. Regev · Mater. Sci. Eng. A · 1997 · A234–236 · 12310.1016/S0921-5093(97)00215-3 ↗
19. Finkel · 1997 · 121
20. Regev · Mater. Sci. Eng. A · 1998 · A252 · 610.1016/S0921-5093(98)00668-6 ↗
21. Regev · Mater. Sci. Eng. A · 1998 · A257 · 349
22. Regev · 1998 · 283
23. M. Regev, A. Rosen and M. Bamberger, in: Proceedings of the 1999 Annual Meeting, San Diego California (1999) 163–170.
24. M. Regev, A. Rosen and M. Bamberger, (1999) submitted for publication.
25. Crawley · Acta Met. · 1974 · 22 · 55710.1016/0001-6160(74)90152-7 ↗
26. Crawley · Metall. Trans. · 1974 · 5 · 94910.1007/BF02643153 ↗
27. W. Blum, P. Weidinger, B. Watzinger, R. Sedlancek, R. Rosch and H.G. Haldenwanger, Zeitschrift fur Metallkunde, Bd. 88 H.8 (1997) 636–641.
28. Blum · 1998 · 49
29. Hertzberg · 1989 · 159